Gateway E-4650 System Manual Download Page 21

Page: 21 / 134

Restarting your computer

Restarting your computer

If your computer does not respond to keyboard or mouse input, you may have
to close programs that are not responding. If closing unresponsive programs
does not restore your computer to normal operation, you may have to restart
the computer.

To close unresponsive programs and restart your computer:

Press C

TRL

. A window opens that lets you close a program that

is not responding.

In Windows XP, Windows Me, Windows 2000, or Windows 98, select the
program that is not responding.

- OR -

In Windows NT, click

Task Manager

, then select the program that is not

responding.

Close the program by clicking

End Task

If the computer does not respond, turn off the computer power, wait ten
seconds and turn the power on again.

As a part of the regular startup process, a program to check the disk status
runs automatically. When the checks are finished, Windows starts.

Important

If the computer does not turn off immediately, you may
need to press and hold the power button for about five
seconds.

Summary of Contents for E-4650







































































































































Search results

Summary of Contents for E-4650

Reviews:

Related manuals for E-4650

Brands by name

Popular brands

Gateway E-4650, System Manual

Search results

Summary of Contents for E-4650

Reviews:

Related manuals for E-4650

Brands by name

Popular brands