Gateway E-4650 System Manual Download Page 7

Page: 7 / 134

Conventions used in this manual

Preface

Conventions used in this manual

Throughout this manual, you will see the following conventions:

Convention

Description

NTER

Keyboard key names are printed in small capitals.

TRL

A plus sign means to press the keys at the same time.

Setup

Commands to be entered, options to select, and messages that
appear on your monitor are printed in bold.

User’s Guide

Names of publications are printed in italic.

Viewpoint

All references to front, back, left, or right on the computer are based
on the computer being in a normal, upright position, as viewed from
the front.

Important

A note labeled important informs you of special
circumstances.

Caution

A caution warns you of possible damage to equipment or
loss of data.

Warning

A warning indicates the possibility of personal injury.

Summary of Contents for E-4650







































































































































Search results

Summary of Contents for E-4650

Reviews:

Related manuals for E-4650

Brands by name

Popular brands

Gateway E-4650, System Manual

Search results

Summary of Contents for E-4650

Reviews:

Related manuals for E-4650

Brands by name

Popular brands