38 Maintaining and Troubleshooting Your E-4200 System
10.
Close the computer case (see “Replacing the desktop case cover” on
page 9 for further instructions).
11.
Plug in the power cable and peripherals.
12.
Turn on the computer.
Installing or replacing an additional 5.25-inch drive in
your desktop computer
You can install another 5.25-inch drive, such as a CD or DVD drive, in the
drive expansion bay to the right of the case.
1.
Turn off the system and disconnect the power cord.
2.
Remove the cover side panels, observing the “Static electricity
precautions” on page 2.
3.
Do one of the following:
•
If a drive is not yet installed in the drive bay, remove the metal drive
bay cover from the front of the bay. Also, remove the plastic drive
bay cover from the front bezel.
•
If you are replacing a drive, disconnect the power and data cables
from the drive, noting their locations and orientations. (You will
reconnect these cables after you install the new drive.)
To install a 5.25-inch drive in the expansion bay
Summary of Contents for E-420
