Gateway 910 Series, System Manual

Page: 91 / 129

System problems
83
The keyboard does not work
The mouse does not work
Probable cause Solution
A key was pressed while the
server was starting up Clear the sticking key, then turn off the server,
wait for a few seconds, then turn the server
back on.
The keyboard is not plugged
in or connected properly Make sure the cable is plugged in correctly.
Something spilled into the
keyboard Turn off the server. Turn the keyboard upside
down to drain, then turn it right side up to let
it dry before using the keyboard again.
The keyboard is defective Try a keyboard you know is working.
Probable cause Solution
The mouse is not plugged in
or connected properly Make sure the cable is plugged in correctly.
The mouse driver did not load
when the server started Load the appropriate mouse driver manually or
contact Gateway Technical Support.
The mouse is defective Try a mouse that you know is working.