Gatekeeper Systems G4-304SD1a User Manual & Installation Manual Download

Page: 59 / 151

G4-304SD1a

User Manual & Install Guide

59 of 151

Figure 5-8 Log Time and Type Selection



Main Menu:

Click this icon to return to the Main Menu.



Back to Previous Screen:

Click this icon to return to the Previous Screen that you were at.



Select Time Period:

Clicking on the

Start Time

field or the

End Time

field will display the on-

screen keypad which allows you to key in a specific time (in hh:mm:ss 24-hour time format).



Select Log Type:

This allows you to select the type of log file to be displayed.

Alarm

: Log file listing alarm events.

Operation

: Log file listing operational events.

Locked

: Log file listing locked events.

What are locked events?

The device setup allows you to configure the recording settings such that video is always

retained for a specified number of days after it is recorded. Locked video refers to recorded

video which falls within the stipulated duration, and hence is protected against being deleted

or overwritten by the device. Locked events are events for which the corresponding video is

still in locked mode.

Summary of Contents for G4-304SD1a
























































































































































Search results

Summary of Contents for G4-304SD1a

Reviews:

Related manuals for G4-304SD1a

Brands by name

Popular brands

Gatekeeper Systems G4-304SD1a, User Manual & Installation Manual

Search results

Summary of Contents for G4-304SD1a

Reviews:

Related manuals for G4-304SD1a

Brands by name

Popular brands