G4-304SD1a
User Manual & Install Guide
25 of 151
4 Camera On-screen View
In 4 Camera (Quad) On-screen View mode, the screen is split into four sections (using a 2x2
grid layout) and video from four cameras is simultaneously shown on the screen.
In order to select a specific camera for viewing, you may press any of the keys [1-5] on the
ICD2 to immediately jump to that channel and display the video stream from the
corresponding camera. This will switch the display to Single Camera On-screen View to
display the video from the selected camera.
Alternatively, with the Finger Mouse or the ICD2, you could also click on any video stream on
the (2x2) grid display to immediately jump to that channel and display the video from the
corresponding camera. This will switch the display to Single Camera On-screen View to
display the video from the selected camera.
Once you have selected a channel to view, you can cycle through the available channels
iteratively in quad grid display mode by pressing the key zero [0] on the ICD2.
9 Camera On-screen View
In 9 Camera On-screen View mode, the screen is split into nine sections (using a 3x3 grid
layout) and video from all connected cameras is simultaneously shown on the screen. Note: all
other areas will display a black box.
In order to select a specific camera for viewing, you may press any of the keys [1-5] on the
ICD2 to immediately jump to that channel and display the video stream from the
corresponding camera. This will switch the display to Single Camera On-screen View to
display the video from the selected camera.
Alternatively, with the Finger Mouse or the ICD2, you could also click on any video stream on
the quad grid display to immediately jump to that channel and display the video from the
corresponding camera. This will switch the display to Single Camera On-screen View to
display the video from the selected camera.
Notes
Channels which do not have cameras configured on them will just show a black
display.
Any channel which is configured with a camera, but is not receiving any video signal
from that camera will show a Video Loss message on the screen.
