G4-304SD1a
User Manual & Install Guide
111 of 151
Trigger Snap
Alarm Snap
Setting this enables the device to
automatically take snapshots whenever an
alarm event occurs.
Clicking the
( Setup )
button displays the snap
link settings page which allows you to
configure the settings for the snapshots to be
taken where there is an alarm event.
In the configuration screen, you will be able to
configure the snapshot settings for each
individual camera channel in turn:
Channel
– this is a drop list allowing
you to select a particular camera
channel. The associated snapshot
settings for this channel will be
displayed for editing.
Snap Enable
– if the checkbox is
selected, then this camera channel is
included when the G4-304SD1a
performs the snap shots.
Resolution
– this drop list enables
you to select the resolution for the
snapshots. Available options are (
CIF,
WCIF,
HD1, WHD1, D1, WD1, 720P
).
Quality
– this drop list enables you to
select the quality of the snapshot on a
scale of 1 to 8 (where 1 is best).
Upload Type
– checkboxes which
allow you to select whether the
snapshots are to be uploaded to FTP
and/or Server.
Snap Numbers
– numeric text field to
key in the number of snapshots that
will be taken.
Interval
– numeric text field to key in
the interval (in seconds) between
snapshots.
Copy To
– this feature allows you to
copy the current snapshot settings for
this channel to another channel, thus
allowing you to easily and quickly
replicate the snapshot settings for the
different camera channels. Once you
have selected the channel to copy to,
click on the
( Copy )
button to make
the copy.
