Models and variants
TW-350
Item No. 110035
TW-350 built-in
Item No. 110135
TW-400
Item No. 110040
TW-400 built-in
Item No. 110140
Installation and setting up
Floor standing devices
The following points must be observed when setting up the free-standing models:
• The distance from the rear wall of the devices to the next wall must be at least 100 mm.
• The pasta cooker must not stand on a flammable surface or be built into a flammable unit.
• The local safety, fire police and building regulations also apply.
• The requirements of the food inspectorate must also be observed.
• The pasta cooker is a fixed device. The roles are only intended to facilitate maintenance and cleaning work.
• These can be removed by simply notching them as required. The device must not be moved during operation.
• The standard height of the device is 850mm. This can be increased to 900mm with a substructure as required.
• The power plug must be accessible after setting up the device.
Stability (standing devices)
Due to insufficient stability, the TW-350 devices must not be set up freely. They must be fastened with the angle
plate included in the scope of delivery. Self-tapping screws can be used for fastening in the sheet metal. For wall or
floor mounting, we recommend using screws with dowels.
Assembly substructure
• Loosen hexagon nuts (6pcs) on the inside of the floor
• Slide in the substructure
• Tighten the hex nuts again.
www.gastrofrit.ch
© Switzerland Gastrofrit AG
3
