background image

Fill with water

1.  Close the drain cock. (See emptying)
2.  Attention with the option „electrical drain cock“ 

the drain cock is always closed as soon as the 

device is de-energized. To operate the electrical 

drain valve, read chapter 7.4 Electrical ball valve 

(drain).

3. 

Press the „Water filling“ 

button. Machine fills according to programm-

ing. Programming. Attention, do not exceed the 

maximum mark!

Programming the filling quantity

•  • The machine must be switched off to program 

the filling.

•   

Press and hold the „Water 

filling“ button for 10 seconds.

•  The filling switches on. Water runs in.
•  „Learn to fill“ appears on the display. Now you 

have to wait until the pool is filled between the 

min. and max. Level.

• 

By pressing the «water filing” 

button again, the  amount is set or the filling time 

is saved. 

Switch on the pasta cooker 

• 

Press the key . With pasta 

cookers, the contactor switches on audibly and 

the display shows 170 ° C and flashes every 

second.

Wash-off

The wash-off function continuously adds fresh water 

to reduce the starch and replace the water lost 

through the boiling process and evaporation.

Press the „wash away“ button.

On / Off rhythm wash-off runs on the factory setting 

level „medium“ Switching off the wash-off function: 

Press the flush button again

Program the wash-off

1.   

    

Press the „wash-off“ button for 10 seconds.

2.  Change intensity with +/- key
3.  Levels: very weak; weak; medium; strong; very 

strong

4.  To save, press the flushing button

Programming the parameters

Program the time  (I, II, III und IV)

1.  Press program buttons I / II / III for at least 10 

seconds each. 

 

 (Double basket button)

2.  The time to be set appears on the display.
3.  Set the time with the „plus“ and „minus“ buttons.
4.  Press program buttons I / II / III again each time
5.  The respective program is now programmed over 

time and can be used.

Temperature settings

• 

53,   21,    33,    170,

TPM: 11%       t: 21 C

3 Sek

 The target value of the 

temperature can be increased with the „+“ key and 

decreased with the „-“ key.

•  As long as the value is flashing, the specified 

temperature has not been reached.

Query current temperature

• 

 

Simultaneously press the „plus“ and „minus“ 

buttons

•  The current measured temperature is displayed. 

The measurement is done with a PT-1000 and has 

an accuracy of +/- one degree Celsius. 

 

www.gastrofrit.ch 

© Switzerland Gastrofrit AG

10

Summary of Contents for TW Series






















Reviews: