Automatic basket lift
The automatic basket lifting function automatically
lifts the pasta basket out of the water when the time
has elapsed.
(The time is stored in which
press the respective button for 10 seconds) As soon
as the time has been programmed, the respective
program button can be pressed. With the pasta cooker
there are 2 programs on the right and 1 program on
the left and a common button for the right and left.
By pressing the respective button, the corresponding
stroke moves down and up again after the time has
elapsed. For example, if you have pressed the Program
1 button once but wanted to press lift 2, you don‘t
have to wait until it comes up again, simply press lift 1
again and the process is canceled.
When the pasta cooker is switched on, the lifting
motor starts up. When it is switched off, it retracts
accordingly to close the lid.
Energy optimization
There are two different types of energy optimization
controls. Energy optimization light and energy optimi-
zation with ABCD interface.
With the energy optimization light, a relay (break
contact) must be provided on site. You can request
detailed documents from us.
Salt check
With this option the salt content of the water can be
checked and the customer has a relief for a constant
quality of the pasta.
With the TW, the monitoring of the salt content (salini-
ty alarm) can be set between 1 ‰ and 30 ‰. (Default
values: Low = 8 ‰ and High 12 ‰). If this value is ex-
ceeded or not reached, the display background color
changes after the set time (time 1 - 60 seconds).
• If there is too little salt, after the set time (Salinity
Alarm Time), the display background lighting
changes to purple and an acoustic alarm (Salinity
Alarm Sound) may sound.
• •If there is too much salt, after the set time (Salini-
ty-Alarm-Time), the display background lighting
changes to blue and an acoustic alarm may sound
(Salinity-Alarm-Sound).
• •If the salinity changes back into the valid range,
the background lighting changes to the normal
color and the acoustic alarm is ended.
The salt content is displayed with the “+” and “-” key
combination and the alarm is reset by pressing the
“+” key.
A salt concentration of 1- 1.2% is perceived as optimal
(10-12g per 1 liter of water)
The interval of the acoustic alarm is 10sec. When ex-
ceeding or falling below the limit values, different tone
sequences sound ...
• Off:
no acoustic alarm
• On:
acoustic alarm when the TW is switched on.
• Temp:
Acoustic alarm when the TW is switched on and
the temperature is> 90 ° C
• Lift:
Acoustic alarm when the TW is switched on, the
temperature> 90 ° C and a HUB is active.
Service functions
Change O-rings on the attachable heater
Description and function
Please make sure, however, that the O-ring (black ring)
cannot be damaged by knives or other sharp objects.
A defective seal means that the heating is no longer
tight and the water runs out and drips into the service
room. The removable heating element is provided
with an O-ring (see picture) which prevents water from
leaking into the interior. The permanent heat load can
cause the O-ring to become brittle and its function
can only be of limited service. This sealing ring can
be exchanged easily. Manufacturer recommenda-
tion: Replace this seal annually. With a maintenance
contract LongLife or LongLifePlus, we as the company
Gastrofrit®AG will carry out this measure. You can
also instruct the manufacturer to have these replaced
during a six-monthly check. You can order the O-ring
or more detailed information on the maintenance con-
tracts by c41 71 855 8070 or info.gastrofrit.ch.
Remove the old O-ring:
New O-ring :
„„by hand „
„Without force“
www.gastrofrit.ch
© Switzerland Gastrofrit AG
12
