64
damage to the scale sensor. After activating the tare function by pressing the TARE
button, keep in mind that the total weight of the vessel plus contents may not exceed
2 kg. If in doubt, check the weight using another course scale. If required, weigh
your food in portions.
Place the objects to be weighed on the centre of the scale platform. On the LCD
display the weight is shown.
Always remove the objects from the scale platform immediately after weighing, to
maintain the accuracy of the scale sensor.
SUBTRACTING THE WEIGHT OF THE VESSEL
For weighing your food in vessels (e.g. liquids, seeds, or flour), the scale can subtract
the weight of the vessel (tare) automatically.
WARNING:
Do not spill any liquids on the appliance. If liquids are spilled on
the appliance, always unplug the appliance immediately, and wipe off spilled liquids
to avoid risk of electric shock, fire, and damage to the appliance. Thereafter, clean
the appliance and leave the appliance dry naturally for at least 1 day (see: ‘Care
and Cleaning’).
CAUTION:
Even when using the tare function, it is crucial to observe the maximum
load of the scale. The total weight of the vessel plus contents may not exceed 2 kg
to avoid damage to the scale sensor.
At first, place the empty vessel on the centre of the scale platform. Press the TARE
button. The LCD display is reset to zero.
Remove the vessel from the scale platform. The LCD display shows the
weight of the vessel with a minus sign. Fill the vessel and place it on
the scale platform again. The LCD display shows the weight of the contents.
You may pour or spoon your food carefully into the vessel with the vessel still on the
scale platform. However, when doing so, it is crucial not to spill any liquids on the
appliance to avoid risk of electric shock and damage.
If you wish to use another vessel or add further ingredients, simply place the vessel
on the scale platform and press the TARE button again shortly. Then repeat step 2.
If you wish to delete the weight of the vessel from the memory of the scale, remo-
ve all objects from the scale platform and press the TARE button. The LCD display
shows zero.