background image

EN

EN

26

27

WARNING

 – During the starting cycle of the machine, hot water is given 

off the group head. Keep your hands away, while the message “Turning on the 

machine” is shown. 

4.   Wait until the home page appears. Thereafter, empty the drip tray and, if 

required, refill the water tank. If you wish to use the grinder, fill the bean hop-

per with fresh, whole coffee beans. Then the machine is ready for making your 

drinks (see: ‘Operation / Filling the Bean Hopper’).

DESIGN OF THE SCREEN-BASED CONTROL

The touch screen of the appliance can be used quite similar to the screen of a smart 

phone: Several different pages are shown, holding messages, pictures, buttons and 

(on many pages) a navigation bar at the leftmost column. You select the setings and 

functions via touching the displayed icons and texts on the screen.
The following sections allow to get familar with the screen-based control of the 

espresso machine. We recommend to switch on the machine, display the pages 

and try the features, mentioned below. However, at the very first start, you must per-

form the first steps for preparating the machine for operation (see: ‘Before First Use 

/ Preparations after Purchasing’).

IMPORTANT - 

Before switching on, always ensure that the drip tray is inserted 

properly and the water tank is filled at least up to the half.

WARNING

 – After switching on, an initialisation process is started and hot 

water will be given off via the group head. Keep your hands and arms away from 

the group head. 

In most cases, the icons are explained via some text. Touch the icon above or 

beneath the text for selecting the assigned command. For example: On the home 

page, touch the gear icon for showing the page “Guide and Settings”.

NOTE

The gear icon will appear on several places. You will find it, whenever a setting 

can be changed.

With a few touches of your finger, the following pages lead to your desired drink: 
•  

Home page:

 As soon as the machine is ready for operation, this page appears 

(see: ‘The Home Page’).

•  

Drink type pages:

 On each of these pages, the icons of 4 drinks lead to pre-

defined settings (see: ‘The Drink Type Pages’).

NOTE

Before entering the drink page of a drink that requires coffee, in most cases an 

additional page appears for selecting 1 cup or 2 cups of espresso. Touch the 

appropriate icon for entering the drink page of the selected beverage. 

•  

Drink pages:

 These pages offer the control areas (framed areas holding icons 

and text) for the single steps of making your drink (see: ‘The Drink Pages’).

IMPORTANT - 

If you touch one of the function icons (bean icon, cup icon, or jug 

icon) on the drink page, the assigned function of the machine will be started. Via 

the icons in the navigation bar, you can go back to the previous pages, without 

starting any funktion (see below: ‘Navigation Bar’). 

THE NAVIGATION BAR 

When a beverage type or the gear icon is selected on the home page, another 

page is displayed with a white column at the left side: the navigation bar, where 

you find up to 3 icons.

Symbol

Funktion

Home icon:

 returns directly to the home page. This icon will be found always in the 

navigation bar.

Arrow:

 leads back to the previously displayed page. 

Plus sign:

 It offers two options for saving your changes permanently to memory 

(“Default” or “MyProfile”). When using these options, your changes will be kept even 

after switching off and unplugging the machine (see: ‘Properties of Your Espresso 

Machine / Memory Function’). 

The navigation bar is available on almost all pages, which enable any settings or 

offer a selection.

Summary of Contents for Design Espresso Barista Pro








































Reviews: