EN
EN
54
55
2. If required, touch “+” or “–” in the appropriate control area for changing the
hours and minutes.
3. In the navigation bar touch the arrow for switching back to the settings page.
Alternatively, touch the home icon for returning directly to the home page.
Changing the Setting of the Water Hardness
The machine asks the water hardness of the used water automatically, before first use
and after each reset to factory settings (see: ‘Reset to Factory Settings’). When the
water hardness is not known, an appropriate test strip is required. A water hardness
test strip is delivered with the machine.
IMPORTANT -
If you wish to use another type of water, we strongly recommend
to test the water hardness and correct the setting. You can use a new test strip or
directly enter the correct value, if it is known already.
There are different types of
water hardness test strips that must be used with various methods. The instruc-
tions displayed via the machine are valid only for the type of test strip that is
delivered with the machine. You may use other types of test strips. In this case,
you must adhere to the method given on the pack for getting correct results.
In this case, switch to the page showing the colour skale directly via the “Next”
button and enter the result.
1. Select the command “Guide and Setting / Maintenance / Water Hardness”.
2. When using the type of test strip that came with the machine, adhere to the
instructions given on the screen.
When using another type of test strip, switch to the colour scale showing the vari-
ous values of the water hardness and adhere to the instructions given on the pack.
IMPORTANT -
The colour scale of the machine is using the unit ppm. A table for
converting the possibly used units and various crucial instructions are given in sec-
tion ‘Before First Use / Preparations After Purchasing’.
3. Touch the correct value in the colour scale. The selected value is centered on the
screen. Confirm your choice by touching “Done”. The Maintenance page appears
again. Via the home icon, you can get back to the home page immediately.
RECALLING THE FACTORY SETTINGS
IMPORTANT -
Recalling the factory settings will delete all changes and individual
settings you made: operating data, customized default values and ALL your own
drinks—even when they have been saved permanently. Only the internal clock
and statistics will be kept.
NOTE
After recalling the factory settings, you must perform the initial steps for prepa-
ring the machine for operation, before you can use of the appliance again (see:
‘Before First Use’).
1. Select the command “Guide and Settings / Settings / Factory reset”.
2. For avoiding that the factory reset is performed in error, you get the chance to
cancel the process on the following 2 pages via the buttons “Dismiss”. If you
select the buttons “Start” and “Reset” on these pages, the original factory settings
are recalled. The control of the machine returns to the operating conditions at
the time of deliverance. Thereafter, the machine starts again automatically.
3. Before making any drinks, you must perform the start sequence again and enter the
required settings for preparing the appliance for operation (see: ‘Before First Use’).
Thereafter, the home page is shown and the machine is ready for operation.
CARE AND CLEANING
WARNING
–
Always ensure that the appliance and all its parts and
accessories are out of reach of children younger than 8 years and animals.
Children must be supervised to ensure that they do not play with the appliance,
its parts, or accessories.
The group head, filter holder, espresso filter, and steam
wand will get very hot during operation and shortly thereafter and steam and hot
water may escape. Always switch OFF the appliance (the screen gets dark), then
unplug the appliance, when it is not in use. Additionally, leave the appliance cool
down and empty the drip tray and the water tank, before cleaning or moving the
appliance. Adhere to the following instructions for cleaning and descaling the
appliance and observe all given safety hints. Do not attempt to assemble or disas-
semble any parts, while a machine function is operating.
Do not clean the appli-
ance or any parts or accessories of it in an automatic dishwasher! Do not
immerse the appliance or power cord in any liquid. Do not spill or drip any
liquids onto the appliance and power cord.
