background image

EN

EN

20

21

THE COFFEE POWDER

Store coffee (whole beans, espresso pods or coffee powder) on a cool, dry, and 

dark place in an air-tight container. However, you should not place the coffee into 

the refrigerator or freezer. Using a vacuum sealer, you can vacuum seal your coffee 

beans or powder in appropriate portions to preserve flavour and taste.
You may use pre-ground coffee powder. However, it must be suited for espresso 

machines. In this case. consume the product within a week, because aroma and 

taste will fade quickly, when storing coffee powder. Coffee beans should be stored 

max. 1 month. It is good advice to buy coffee beans in small batches to reduce the 

storage time. The grind size influences the rate of the water flow (extraction time; see 

below) during extraction and, therefore, the taste of the espresso. When grinding the 

coffee beans yourself, the grind size should be fine but not too fine.

IMPORTANT - 

For grinding, use a high-quality coffee grinder. Grinders with rota-

ting blades generate an uneven ground powder with high amounts of extreme-

ly small particles, that may clog the mesh of the espresso filters. Additionally the 

extraction results will hardly be reproducible.

It is best to grind coffee beans directly before the extraction 

via the grinder of the 

appliance

. For adjusting the grinder (grind size and grinding amount; see: ‘Entering 

Your Own Settings / Adjusting the Grinder’), we recommend to start your tries with 

the following combinations of settings: 

Grind Size

Grinding Amount

9, 10 (coarse)

Minimum

6 to 9 (medium)

Normal

5 and 6 (fine)

Maximum

EXTRACTION TIME

While extracting (brewing) the espesso, the water should flow through the coffee powder 

with an optimum flow rate. Appropriate instructions are given via the machine. Select the 

commands “Guide and Setting / Guide and Info / Brewing Guide”. Touch the buttons  

“Balanced”, “Too fast”, and “Too slow” for displaying the appropriate hints. 

FILLING THE ESPRESSO FILTER AND TAMPING THE COFFEE POWDER 

On deliverance, the amount of coffee powder given off via the grinder of the appliance 

is pre-set correctly for 1 cup or 2 cups of coffee. You select the desired number of cups 

immediately after selecting the beverage. Do not overfill the espresso filter, when using 

pre-ground coffee powder. Leave at least 3 mm of free space between the tamped 

coffee powder and the rim of the espresso filter. We recommend to use the measuring 

spoon at the handle of the provided tamper for getting the correct amount. Fill the measu-

ring spoon to the brim for getting the correct amount for 1 cup of espresso.
After filling the espresso filter, distribute and tamp the coffee powder evenly. It may 

be useful to tap carefully at the side of the filter holder for getting an even distributi-

on, before tamping the coffee powder with the flat side of the tamper. 
When applying too much force for tamping, the water will flow too slowly. If the coffee 

powder is not tamped sufficiently, the water flows too quickly and your coffee will be 

watery and light. Try to reach an extraction time of 4-7 seconds (see: ‘Extraction Time’).

BEFORE FIRST USE

WARNING

 – 

Always ensure that children do not play with the appli-

ance or any part of it or the packaging!

 Do not leave children younger than 8 

years unattended, when the appliance, any part or accessories of it, or the packa-

ging are in their reach. 

WARNING - RISK OF BURNS!

 During operation, some parts of the 

appliance get very hot and may give off hot water and hot steam under high pres-

sure (e.g. group head, steam wand). Before starting any function, always ensure 

to assemble the appliance completely and correctly. Always ensure to switch OFF 

the appliance (pressing the on/off button; control panel and display get dark), 

unplug and wait until the appliance cooled down, before moving or cleaning the 

appliance and when the appliance is not in use.

WARNING - RISK OF ELECTRIC SHOCK!

 Do not pour or spill 

any liquids on or under the appliance. Do not place or immerse the appliance in 

any liquids. Always keep the grinder completely dry.

 Therefore, do not drip or 

spill any liquid into the bean hopper.

 Do not place clothes or similar materials 

on or under the appliance during operation. If any liquid has been spilled on the 

appliance or ran into the housing or grinder, immediately unplug the appliance, 

and dry the appliance according to the instructions in chapter ‘Care and Clea-

ning’. Always empty the drip tray and water tank or remove these parts, before 

moving the appliance (see: ‘Operation’).

1.   Pull the appliance and all parts out of the shipping box. Remove and discard all 

promotional labels, stickers, and packaging materials attached to your espresso 

machine, but do not remove the model label at the bottom of the appliance. 

Before discarding the packaging, ensure that you have found all parts and 

accessories (see: ‘Knowing Your Espresso Machine’).

Summary of Contents for Design Espresso Barista Pro








































Reviews: