NOTE:
Machine will exit and start up without
saving if no operation for 30 seconds or
user presses the EXIT button.
Step 2 – Empty Boilers
a) Remove grey silicon cover on the right
hand lower side of the front panel mar-
ked DESCALE ACCESS.
REMOVE
b) Using a flat-head screwdriver, rotate the
left screw counter-clockwise first, until val-
ve is fully open. Water will begin to flow
into drip tray from underneath.
c) Do the same for the right screw. Steam
will be released from the boiler.
CAUTION HOT STEAM!
d) Close valves when water stops flowing
through both outlets. Empty drip tray and
re-assemble onto unit.
CAUTION HOT WATER!
e) Press 1 cup button, to proceed to next
step.
Step 3 – Begin De-scale
NOTE:
If water tank has not been removed then
replaced or is empty "Fill Tank" will be dis-
played in the LCD.
a) Machine will fill boilers with de-scale solu-
tion and heat to temperature.
b) 20 minute timer will begin. Countdown timer
is finished when LCD leaves BLANK.
(This allows solution to dissolve scale
build up).
75
