69
HOT WATER LED Flashing At START
UP
The machine will not enter START UP mode
when the HOT WATER dial is in the OPEN
position and the HOT WATER LED is flas-
hing.
Move the HOT WATER dial to the CLOSED
position for the machine to enter START UP
mode.
HOT WATER LED Flashing
The HOT WATER LED will flash when the
HOT WATER function has been operating for
longer than 1 minute.
Move the HOT WATER dial to CLOSED posi-
tion for machine to enter STANDBY mode.
FILL TANK
The machine will detect a low water level.
The FILL TANK icon will be displayed on the
LCD screen.
If FILL TANK icon is displayed, add water
to tank until machine returns to STANDBY
mode.
Clean Me!
The machine will detect when 200 extrac-
tions have been carried out since the last
clean cycle.
The CLEAN ME! icon will be displayed on
the LCD screen the next time the machine
enters START UP mode.
For information on how to clean the machi-
ne, refer to the Cleaning Cycle instructions
on page 73.
