29
ALARMS MENU
CUSTOM LATCH
DEFAULT TEMPERATURE
WARNINGS
EXIT
2. Use the navigation arrows to highlight WARNINGS and
press the MODE button. The warning alarm settings
screen will then be shown.
WARNINGS
ENABLE
ADJUST
TIMEOUT
EXIT
3. Use the up and down navigation arrows to highlight
TIMEOUT and press the MODE button.
TIMEOUT
ADJUST
TIME = 1 min
EXIT
4. Use the up and down navigation arrows to adjust the
interval as needed. Once the interval has been set as
needed, press the MODE button to enter the new setting.
Save Changes?
YES
NO Cancel
5
Press the MODE button with YES highlighted to save the
new warning alarm setting.
3.6 The Time Menu
For Cannonball3 instruments that do not include the datalogger
upgrade, the Time Menu provides access to date and time-
related functions.
Note: If your Cannonball3 shows DATALOGGER in place
of TIME in the Options Menu, proceed to Chapter 5.
3.6.1
Entering the Time Menu
1. Enter the Main Menu as described above in section 3.1.1.
MAIN MENU
SCREEN CALIBRATION
VIEW ALARMS
TIME
OPTIONS
ID INFO
EXIT
2. Use the navigation arrows to highlight TIME and press the
MODE button. The Time Menu will then be shown.
TIME MENU
TIME/DATE
SERV
DATE
COMM
EXIT
3.6.2
Time and date settings
Since the Cannonball3 records instrument data that may be
used at a later date, it is important that the time and date be
accurate.
To change the time and date:
1. Enter the Time Menu as described above in section 3.6.1.
TIME MENU
TIME/DATE
SERV
DATE
COMM
EXIT
2. Use the navigation arrows to highlight TIME/DATE and
press the MODE button.
DATE & TIME
17
JUN 2005
09:45 EXIT
3. The right and left navigation arrows are used to move
back and forth between the day, month, year, and time
settings and the EXIT option. Once the time setting that
needs to be adjusted is highlighted, the up and down
navigation arrows are used to adjust the setting.
Summary of Contents for Cannonball3
Page 75: ......