30
DATE & TIME
17 JUN 2005
10:45
EXIT
4. The MODE button may be pressed at any time to confirm
the new time settings.
DATE & TIME
17 JUN 2005
10:45 EXIT
Save Changes?
YES
NO CANCEL
5. Press the MODE button with YES highlighted to confirm
the new time and date settings.
3.6.3
Service date settings
The Cannonball3 can be programmed to automatically remind
the user to service the sensors in the unit. To reach the
service due date settings for the individual sensors:
1. Enter the Time Menu as described above in section 3.6.1.
TIME MENU
TIME/DATE
SERV DATE
COMM
EXIT
2. Use the navigational arrows to highlight SERV DATE and
press the MODE button.
SERVICE MENU
CHANGE SERV DATE
SERVICE
ON/OFF
EXIT
3.6.3.1 Enable/Disable sensor service due date settings
1. Enter the Service Menu screen as described above.
SERVICE MENU
CHANGE SERV DATE
SERVICE ON/OFF
EXIT
2. Use the up navigation arrows to highlight SERVICE
ON/OFF and press the MODE button.
SENSOR DUE DATE
O2
DISABLED
LEL
DISABLED
CO
DISABLED
H2S
DISABLED
EXIT
3. To change the service due setting for an individual sensor,
use the up and down navigation arrows to highlight the
setting adjacent to the sensor, the right or left navigation
arrows may then be used to toggle back and forth
between “enabled” and “disabled”.
SENSOR DUE DATE
O2
ENABLED
LEL
DISABLED
CO
DISABLED
H2S
DISABLED
EXIT
4. Once the sensor due date settings are enabled or disabled
as required, press the MODE button to enter the settings.
Save Changes?
YES
NO Cancel
5. Press the MODE button with YES highlighted to confirm
the new settings.
3.6.3.2 Change sensor service due dates
1. Enter the Service Menu as described above.
Summary of Contents for Cannonball3
Page 75: ......