66
#1 07:45-11:15
09 NOV 2001
PEAK
READINGS
O
2
20.5 MIN
O
2
21.1 MAX
LEL
0
CO 0
H
2
S 0
5. Press the MODE button at any time to return to the Main
Menu.
5.3.2.5 Service
Date
The Cannonball3 can be programmed to automatically remind
the user to service the sensors in the unit. To reach the
service due date settings for the individual sensors do the
following:
1. Enter the Datalogger Menu as described above in section
5.3.2.
DATALOGGER MENU
INTERVAL
CLEAR
DL
TIME/DATE
SESSIONS
SERVDATE
COMM
EXIT
2. Use the navigational arrows to highlight SERV DATE and
press the MODE button.
SERVICE MENU
CHANGE SERV DATE
SERVICE
ON/OFF
EXIT
5.3.2.5.1 Enable/disable sensor service due date settings
1. Enter the Service Menu screen as described above.
SERVICE MENU
CHANGE SERV DATE
SERVICE ON/OFF
EXIT
2. Use the up navigation arrows to highlight SERVICE
ON/OFF and press the MODE button.
SENSOR DUE DATE
O2
DISABLED
LEL
DISABLED
CO
DISABLED
H2S DISABLED
EXIT
3. To enable (or disable) the service due setting for an
individual sensor, use the up and down navigation arrows
to highlight the setting adjacent to the sensor, and then
press the right or left navigation arrow once.
SENSOR DUE DATE
O2
ENABLED
LEL
DISABLED
CO
DISABLED
H2S DISABLED
EXIT
4. Once the sensor due date settings are enabled or disabled
as required, press the MODE button to enter the settings.
Save Changes?
YES
NO Cancel
5. Press the MODE button with YES highlighted to confirm
the new settings.
5.3.2.5.2 Change sensor service dates
1. Enter the Service Menu as described above.
SERVICE MENU
CHANGE SERV DATE
SERVICE
ON/OFF
EXIT
2. Use the up navigation arrows to highlight CHANGE SERV
DATE and press the MODE button.
Summary of Contents for Cannonball3
Page 75: ......