General Maintenance
Page
127
05/06
4. Hydraulic system
Inspect all hydraulic hoses for
external wear.
Inspect all hydraulic fittings for
possible leaks.
5. Variator (ground drive)
Check oil seals for leakage.
6. Auger (if fitted).
Check locking mechanism is correctly
adjusted and that the auger barrel cannot
move in transport.
During the Season
1. Metershaft Assembly
Grease metershaft nose assembly
bearing.
You will need to remove the metershaft
assembly from the meterbox to gain access
to this bearing. This bearing should be
greased at least once during the season as
well as at the beginning and end of season.
Refer to the meterbox section for more
information.
Fig. GM2- 2150FT fitted with rear platform option.
