GAS GAS WILD HP 450-07, User Manual

Page: 114 / 142

-
42
-
Cleaning process
WARNING
Clean the filter in a well-ventilated zone and ensure that there are
no sources of naked flame or sparks near the work area (including
the focus of a powerful light). Do not use petrol to clean the filter as
this could result in an explosion.
(C). Air filter housing.
(D). Inspection hose.
1. Raise the seat and
unlock the metal
safety locks Then
open the air filter
cover.
2. Loosen the metal
clamp (E) and
remove the air filter
from its housing.
3. Separate the foam and the cage that make up the air filter
assembly.
5. Then drain it
carefully and allow it
to dry for a few
minutes.
- Check the air filter for damage such as scraping, hardening,
shrinkage…
If it is damaged then replace, otherwise dirt will enter the throttle
body.
4. Submerge the filter
in a container with
degreasing liquid for
cleaning filters. This
liquid should clean
the filter without
damaging it.
NOTE
Do not twist the element when drying.
(C)
(D)
(E)