![background image](http://html1.mh-extra.com/html/gas-gas/wild-hp-450-07/wild-hp-450-07_user-manual_3667683111.webp)
-
39
-
NOTE
Ensure that the bolts are tightened and that the chain tension
is correct.
Inspection of the chain
Inspect the chain for damaged links, lost pins, unequal sprocket
teeth or damaged teeth.
If the drive chain is damaged, go to a specialised workshop and
have it replaced.
Chain lubrication
Good chain maintenance is essential to ensure the correct operation.
Chain lubrication is one of the operations that must be performed
frequently.
How often do you need to lubricate the chain?
- After riding on wet ground.
- When it has a dry appearance.
- After cleaning the motorbike.
- If the QUAD has not been used for a long time.
A high viscosity oil rather than low viscosity oil is better because it
will stay on the chain longer providing lubrication.
Put oil on the sides of the chain pins so that it penetrates into these;
remove excess oil.
CHECKING THE COOLANT LEVEL
The coolant absorbs excessive heat from the engine and transfers
it to the air by the radiator. If the level of fluid has diminished
constantly, the engine may overheat and become seriously damaged.
Check the coolant level each day before riding the QUAD.
NOTE
The level should not go down in normal conditions. If liquid
must be added often, revise the circuit for leaks and take the
QUAD to a specialist.
WARNING
To avoid burns, do not remove the radiator cap or try to change the
coolant when the engine is still hot. Wait for it to cool down.
- Go to the rear of the
QUAD. There are four
bolts (A) on the swing
arm.
- Unscrew the 4
screws.
- With the spanner (B),
that comes with your
QUAD, adjust the
chain correctly and
then retighten the four
bolts.
(A)
(B)
Summary of Contents for WILD HP 450-07
