GARO ENTITY PRO, Installation And Operations

Page: 24 / 91

4.12.1 TO INSTALL THE STICKERS FOR IT 230 V
NOTE
This instruction is only valid for IT 230 V systems.
1. Locate the stickers on the installation bracket.
2. Install the new stickers supplied with the installation
bracket. Install the new stickers onto the old stickers.
4.12.2 TO PREPARE THE INSTALLATION BRACKET
FOR THE CABLE INSTALLATION
1. Decide the inlet points for the power cable.
a. Remove the knock-out from the inlet hole of the
power cable.
b. If there are several charging stations to be daisy-
chained with the same feeding cable, also
remove the knock-out for the outlet hole of the
second power cable.
c. Insert a suitable grommet in the knock-out hole.
2. If the connection to internet, or other charging
station, is decided to be via an ethernet cable,
prepare the inlet of the ethernet cable(s).
NOTE
It is possible to install the ethernet cable in several ways,
but there are dedicated break-outs for the ethernet cable
in the installation bracket. Maximum cable diameter for
the break-out is 8 mm.
M32
24
Installation