Garmin Volvo Penta Glass Cockpit B12 Owner'S Manual Download Page 5

Page: 5 / 106

Auto Guidance......................................... 26

Setting and Following an Auto Guidance
Path...................................................... 26
Creating and Saving an Auto Guidance
Path...................................................... 26
Adjusting a Saved Auto Guidance
Path...................................................... 26
Canceling an Auto Guidance Calculation
in Progress........................................... 26
Setting a Timed Arrival......................... 26
Auto Guidance Path Configurations..... 26

Adjusting the Distance from Shore... 27

Tracks...................................................... 27

Boundaries............................................... 28

Creating a Boundary............................ 28
Converting a Route to a Boundary....... 28
Converting a Track to a Boundary........29
Editing a Boundary............................... 29
Linking a Boundary to a SmartMode
Layout...................................................29
Setting a Boundary Alarm.................... 29

Disabling all Boundary Alarms............. 29
Deleting a Boundary............................. 29

Deleting All Saved Waypoints, Tracks,
Routes, and Boundaries.......................... 29

Sailing Features................................. 29

Setting the Vessel Type for Sailing
Features................................................... 29
Sail Racing............................................... 29

Starting Line Guidance......................... 29

Setting the Starting Line................... 30
Using the Starting Line Guidance..... 30

Starting the Race Timer....................... 30
Stopping the Race Timer......................30
Setting the Distance between the Bow
and the GPS Antenna.......................... 30

Laylines Settings...................................... 30
Polar Tables............................................. 30

Importing a Polar Table........................ 30
Showing Polar Data in Data Fields.......31

Setting the Keel Offset............................. 31
Heading Line and Angle Markers.............31

Setting the Heading Line and Angle
Markers................................................ 31

Water Sport Controls......................... 32

Creating a Water Sports User Preset...... 32

Renaming a User Preset Button...........32

Setting the Boat RPM or Speed............... 32

Setting the Speed Source.................... 32

Adjusting the Trim Tabs........................... 32
Adjusting the Power Trim......................... 32
Adjusting the Ballast Tank Levels............ 32

Ballast Tank Tips.................................. 33
Adjusting Ballast Tank Drain and Fill
Times....................................................33

Turning on the Trim Assist Feature..........33
Adjusting the Boat Load........................... 33

Sonar Fishfinder.................................33

Stopping the Transmission of Sonar
Signals..................................................... 33
Changing the Sonar View........................ 33
Traditional Sonar View............................. 33

Split-Frequency Sonar View................. 34
Split-Zoom Sonar View.........................34

Garmin ClearVü Sonar View.................... 34
Garmin SideVü™ Sonar View..................34

SideVü Scanning Technology.............. 34

Table of Contents

iii

Summary of Contents for Volvo Penta Glass Cockpit B12











































































































Search results

Summary of Contents for Volvo Penta Glass Cockpit B12

Reviews:

Related manuals for Volvo Penta Glass Cockpit B12

Brands by name

Popular brands

Garmin Volvo Penta Glass Cockpit B12, Owner'S Manual

Search results

Summary of Contents for Volvo Penta Glass Cockpit B12

Reviews:

Related manuals for Volvo Penta Glass Cockpit B12

Brands by name

Popular brands