Garmin Volvo Penta Glass Cockpit B12 Owner'S Manual Download Page 13 | Manualshive

Page: 13 / 106

background image

Introduction

WARNING

See the

Important Safety and Product Information

guide

in the product box for product warnings and other
important information.
All route and navigation lines displayed on the chartplotter
are only intended to provide general route guidance or to
identify proper channels, and are not intended to be
precisely followed. Always defer to the navaids and
conditions on the water when navigating to avoid
groundings or hazards that could result in vessel damage,
personal injury, or death.

NOTE:

Not all features are available on all models.

After more than 100 years in the maritime industry, the
name Volvo Penta

®

has come to symbolize reliability,

technical innovation, first-class performance, and long life.
We believe that these qualities correspond well to the
demands and expectations you have of your Volvo Penta
product.
The Volvo Penta Glass Cockpit, designed in a
collaboration between Volvo Penta and Garmin

®

, has a

new user interface that includes instrumentation for
navigation and communications equipment. The monitors
are fully integrated with Volvo Penta drive systems and
other instruments.
In order for you to enjoy everything you would expect from
the product, we ask that you read through the instruction
manual carefully and take note of our advice on boat
operations and maintenance before you make your first
trip. Pay attention to the safety instructions in the manual.
We would also like to welcome you to our world-wide
network of distributors and repair shops, which can help
you with technical advice, service, and spare parts.
The Volvo Penta website at

support.garmin.com

presents

up-to-date information about your product. The support
pages will provide answers to frequently asked support
questions, and you can download software and chart
updates. There is also contact information to Volvo Penta
support should you have any questions.
You can locate your nearest Volvo Penta dealer through
the integrated dealer locator in the Glass Cockpit or by
visiting our website at

www.volvopenta.com

.

Welcome aboard!

Device Overview

Status bar that shows active alarms and functions

TIP:

To view more information about the alarms

and functions, select

or drag the status bar

down.

Power key

Automatic backlight sensor

Glass Cockpit B7 and Glass Cockpit B9 Connector

View

POWER

Power and NMEA

®

0183 network

ETHERNET Garmin Marine Network

J1939

J1939 engine network

Ground screw

CVBS IN

Composite video in

SONAR

12-pin transducer (Not available on all
models)

USB

Micro-USB for compatible Garmin card
reader

1

NMEA 2000 NMEA 2000

®

network

2 microSD

®

memory card slots, 32 GB

max.

1

Only compatible Garmin card readers recommended. Third-party card readers

are not guaranteed to be fully compatible.

Introduction

1

«
...
11
12
13
14
15
...
»

Summary of Contents for Volvo Penta Glass Cockpit B12











































































































Reviews:

No comments

Related manuals for Volvo Penta Glass Cockpit B12

Brand: IBM Pages: 12

Brand: K&K Pages: 10

Brand: Banner Pages: 15

Brand: bar Pages: 2

Brand: York Pages: 24

sensoCOMFORT VRC 720/3

Brand: Vaillant Pages: 64

Brand: ZPA Pecky, a.s. Pages: 36

Brand: TeleMann Pages: 4

Brand: D+H Pages: 2

Brand: Danfoss Pages: 4

Brand: Zonex Pages: 16

Brand: Parker Pages: 8

color LaserJet 5500

Brand: IBM Pages: 192

AUMATIC ACExC 01.2

Brand: AUMA Pages: 92

Brand: Lab-T Pages: 7

Powador XP Series

Brand: Kaco Pages: 10

Brand: Control Techniques Pages: 38

Brand: Evco Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands