Garmin GTN 725 Cockpit Reference Manual Download

Page: 68 / 86

GTN 725/750 Cockpit Reference Guide (CRG)

190-01007-04 Rev. C

Messages

Message

Description

Action

DATALINK-
GDL 69 is inoperative
or connection to GTN
is lost.

The GTN is confi gured for
a Garmin datalink (GDL
69 or 69A) and the GTN
cannot communicate with
the datalink. Data from
the datalink will not be
available.

Contact dealer for service.

DATALINK-
GDL 88 is inoperative
or connection to GTN
is lost.

The GTN is confi gured
for a Garmin datalink
(GDL 88) and the GTN
cannot communicate with
the datalink. Data from
the datalink will not be
available.

Contact dealer for service.

DATALINK-
GDL 88 ADS-B failure.
Unable to transmit
ADS-B messages.

GDL 88 is not able
to transmit an ADS-B
message due to a failure
with the GDL 88 system
or antenna(s).

Contact dealer for service.

DATALINK-
GDL 88 ADS-B fault.

The GDL 88 has detected
a fault with one of
the GDL 88 UAT/1090
antennas.

Contact dealer for service.

DATALINK-
ADS-B fault: UAT
receiver.

The GDL 88 has detected
a UAT receiver fault.

Contact dealer for service.

DATALINK-

ADS-B fault: 1090
receiver.

The GDL 88 has detected
a 1090 receiver fault.

Contact dealer for service.

DATALINK-
GDL 88 ADS-B not
transmitting position.
Check GPS devices.

The GDL 88 has detected
a position input fault.

Contact dealer for service.

Summary of Contents for GTN 725























































































Search results

Summary of Contents for GTN 725

Reviews:

Related manuals for GTN 725

Brands by name

Popular brands

Garmin GTN 725, Cockpit Reference Manual

Search results

Summary of Contents for GTN 725

Reviews:

Related manuals for GTN 725

Brands by name

Popular brands