manualshive.com logo in svg

Garmin GTN 725, Cockpit Reference Manual

Share
Download
Garmin GTN 725 Cockpit Reference Manual Download Page 65

57

190-01007-04  Rev. C

GTN 725/750 Cockpit Reference Guide (CRG)

Messages

Message

Description

Action

CONFIGURATION- 
Terrain/TAWS 
confi guration is invalid. 
GTN needs service.

TAWS is inoperative 
due to a confi guration 
problem with the GTN. 
This message will be 
accompanied by a TER 
FAIL annunciation. 

Contact dealer for service. 

CONFIGURATION 
MODULE-  
GTN confi guration 
module needs service. 

GTN cannot communicate 
with its confi guration 
module. The GTN may still 
have a valid confi guration. 

Contact dealer for service. 

COOLING-  
GTN overtemp. 
Reducing backlight 
brightness. 

Backlight brightness has 
been reduced due to high 
display temperatures. The 
backlight level will remain 
high enough to be visible 
in daylight conditions. 

Decrease cabin temperature 
and increase cabin airfl ow 
(especially near the GTN). 
Contact dealer for service if 
this message persists. 

COOLING FAN-  
The cooling fan has 
failed. 

GTN cooling fan is 
powered, but it is not 
turning at the desired 
RPM. 

Decrease cabin temperature 
and increase cabin airfl ow 
(especially near the GTN) to 
prevent damage to the unit. 
Contact dealer for service. 

CROSSFILL ERROR-  
Crossfi ll is inoperative. 
See CRG for crossfi lled 
items.

Crossfi ll is not 
working due to loss of 
communication with other 
GTN or due to one GTN 
needing service. 

See list of crossfi lled items 
listed in System section that 
will no longer be crossfi lled. 
Contact dealer for service. 

CROSSFILL ERROR-  
GTN software 
mismatch. See CRG for 
crossfi lled items. 

Crossfi ll is confi gured 
“on” but is not working 
due to software mismatch. 

See list of crossfi lled items 
listed in System section that 
will no longer be crossfi lled. 
Contact dealer for service 
and to have software 
versions updated. 

Summary of Contents for GTN 725























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands