Garmin GTN 725 Cockpit Reference Manual Download

Page: 36 / 86

GTN 725/750 Cockpit Reference Guide (CRG)

190-01007-04 Rev. C

Charts

CHARTS



Charts

Chart Information

Touch to view information about
current airport.

Chart currently
displayed. Touch
to enter new
airport.

Touch to select
specifi c chart.

Touch to view approach
procedures.

Touch to view
departure
procedures.

Touch to
display chart
in full screen.

Touch to view arrival
procedures.

Touch to view airport information
such as general info, preview,
procedures, runways, frequencies,
WX Data, and Chart NOTAMs.

Touch to zoom in or out
on chart.

Charts Page

Menu Options



Shows an inverted color view of the
display that enhances low light viewing.

Touch to select chart information.
Selections include All, Header, Plan,
Profi le and Minimums.

Chart Options Menu

Summary of Contents for GTN 725























































































Search results

Summary of Contents for GTN 725

Reviews:

Related manuals for GTN 725

Brands by name

Popular brands

Garmin GTN 725, Cockpit Reference Manual

Search results

Summary of Contents for GTN 725

Reviews:

Related manuals for GTN 725

Brands by name

Popular brands