Garmin GTN 725 Page 52 Cockpit Reference Manual Download

Page: 52 / 86

GTN 725/750 Cockpit Reference Guide (CRG)

190-01007-04 Rev. C

System

SYSTEM



System

System Page

Touch to customize the
units of measurement for
NAV Angle, Temperature,
and Fuel.

Touch to customize alerts
of arrival, destination
proximity, airspace altitude
buffer, and entry into
selected airspaces.

Touch to view the setup of the
CDI, Date/Time, Nearest Airport
Criteria, and COM Channel
Spacing, and Crossfi lled Items.

Touch to customize the
level of backlighting.

Touch to customize
the ownship symbol.

Touch to customize the
volume of the response
sound when touching the
screen.

Touch to display serial
number, system ID,
version information, and
database information.

Touch to display the status
of GPS reception.

Touch to view the status of
any external LRUs that are
connected to the GTN.

Summary of Contents for GTN 725























































































Search results

Summary of Contents for GTN 725

Reviews:

Related manuals for GTN 725

Brands by name

Popular brands

Garmin GTN 725, Cockpit Reference Manual

Search results

Summary of Contents for GTN 725

Reviews:

Related manuals for GTN 725

Brands by name

Popular brands