Garmin GPSMAP 520 - Marine GPS Receiver Owner'S Manual Download Page 114

Page: 114 / 132

Radio Troubleshooting Guide

104

Rino

520/530 Owner’s Manual

PPENDIX

ROUBLESHOOTING

UIDE

Symbol

Probable Cause

Remedy

Radio not transmitting

Talk

key may not be fully depressed.

Press and hold

Talk

key until done talking.

FRS/GMRS Radio feature not on or battery low..

Turn radio on or recharge battery..

Messages not being received by others.

Incorrect Channel/Code setting

Make sure other radios are on the same channel, code and scramble.

Out of range or obstructed.

Decrease distance between radios. Adjust Squelch setting.

Limited talk range.

Natural or man-made obstructions can decrease

range.

Decrease distance between radios or obtain a better line of sight

between radios. If GMRS, power may be set too low..

You can hear others, but they cannot hear

you, or you see an incoming transmission, but

nothing is heard.

You are on the same channel, but a different Code.

If you are using Code zero (0), you will hear all transmissions on that

channel. Use the same Code (1-38) as the other party or use Scan to

Find what Code they are using.

Message garbled.

Scramble option is enabled.

Both radios need to have this feature set the same.

Too many unwanted conversations being heard. Too many users on channel or Code is set to zero.

Switch to a different channel and/or different Code other than zero

(1–38).

Interference or static.

Radios too far apart or too close. Obstructions in

radio line of sight.

Keep radios at least 3 feet apart. Obtain a better line of sight between

radios. Also, try increasing the squelch to accept only strong signals.

Interference from other electronics.

Shut off other devices or move to a different area.

Cannot transmit location.

Could be one of a few things: Your view of the

satellite is obstructed and a GPS ﬁx is not available.

Send Location

is off. 30 seconds have not elapsed

since last location transmission. GPS is set to off.

Move to a location with a clear view of the sky. Enable

Send Location

Wait 30 seconds between location transmission. Enable GPS.

Only

Call

and

Press To

Talk

keys work.

Keylock is enabled.

Hold the

Page/Quit

button for 5 seconds to release key lock.

Summary of Contents for GPSMAP 520 - Marine GPS Receiver





































































































































Search results

Summary of Contents for GPSMAP 520 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 520 - Marine GPS Receiver

Brands by name

Popular brands

Garmin GPSMAP 520 - Marine GPS Receiver, Owner'S Manual

Search results

Summary of Contents for GPSMAP 520 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 520 - Marine GPS Receiver

Brands by name

Popular brands