Garmin GPSMAP 520 - Marine GPS Receiver Owner'S Manual Download Page 13

Page: 13 / 132

ETTING

TARTED

Back of the Rino 520/530

2-way FRS/GMRS Antenna

Headset Connector with Weather Cap

Mini USB Port with Weather Cap

GPS Antenna

Lithium-Ion Battery Pack

Belt Clip/Bike/Auto Mount Connector

Battery Pack Locking D-Ring

Rino

520/530 Owner’s Manual

Lithium-Ion Battery Information

• Completely charge with the battery attached to the Rino prior to use

to ensure accurate capacity reporting. Refer to the Quick Start Guide.

• Avoid prolonged exposure to direct sunlight and high temperatures

as this can reduce useful battery life. See “Speciﬁcations”

• Do not store a fully discharged battery for long periods of time. This

may prevent the battery from recharging.

• See the section on Warnings and Precautions for instructions on

proper disposal of batteries no longer capable of being recharged.

• If the battery capacity gauge becomes inaccurate; fully discharge

the battery by leaving the unit On, in normal mode, until it shuts off.
Then fully charge the battery while attached to the unit.

Battery Charger Contacts

Lower - Wrist Strap Attachment Point

Upper - Wrist Strap Attachment Point

Summary of Contents for GPSMAP 520 - Marine GPS Receiver





































































































































Search results

Summary of Contents for GPSMAP 520 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 520 - Marine GPS Receiver

Brands by name

Popular brands

Garmin GPSMAP 520 - Marine GPS Receiver, Owner'S Manual

Search results

Summary of Contents for GPSMAP 520 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 520 - Marine GPS Receiver

Brands by name

Popular brands