Garmin GPSMAP 520 - Marine GPS Receiver Owner'S Manual Download Page 111

Page: 111 / 132

Rino

520/530 Owner’s Manual

101

PPENDIX

PECIFICATIONS

Radio

Channels:

Ch 8–14 FRS,

Ch 1-7, 15–22 GMRS (FCC license req. in U.S.)

WX 1–7 Weather Radio channels

Codes:

1–38

Range:

Up to 2 miles on FRS; up to 14 miles on GMRS

Radio Output Power:

FRS 0.5 W; GMRS 2.0 W or 5.0 W (5.0 W - US

only)

Alkaline battery pack, 0.5, 2.0 W

Power

Input:

8.4 V, 2400mAh, rechargeable 2–cell lithium-

ion battery pack

Battery Life:

Li-Ion Pack: Up to 16 hours (GMRS 5 watt TX,

GPS On)

Alkaline Pack: Up to 18 hours (GMRS 2 watt

TX, GPS On)

Recharging Time:

Up to 6 hours for a fully depleted Li-Ion Pack

Speciﬁcations are subject to change without notice.

Subject to proper user calibration.

Subject to accuracy degradation to 100m 2DRMS under the U.S.

DoD-imposed Selective Availability program.

With optional Garmin Differential Beacon Receiver Input (such as

Garmin GBR 23).

5, 5, 90 Duty Cycle - 5% receive with audio unmuted, 5%

transmit and 90% standby (receive with audio muted)

Summary of Contents for GPSMAP 520 - Marine GPS Receiver





































































































































Search results

Summary of Contents for GPSMAP 520 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 520 - Marine GPS Receiver

Brands by name

Popular brands

Garmin GPSMAP 520 - Marine GPS Receiver, Owner'S Manual

Search results

Summary of Contents for GPSMAP 520 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 520 - Marine GPS Receiver

Brands by name

Popular brands