Garmin GPSMAP 520 - Marine GPS Receiver Owner'S Manual Download Page 108

Page: 108 / 132

Rino

520/530 Owner’s Manual

PPENDIX

BOUT

FRS/GMRS R

ADIO

About FRS/GMRS Radio

FRS Radio

FRS, or Family Radio Service, is a UHF radio frequency

band allocated by the FCC for general public use. The

operating frequency ranges from 462.5625 to 467.7125

MHz, with a maximum transmitting power of one half

watt. FRS radios are small and lightweight, making them

ideally suited for outdoor activities. You can expect your

FRS radio to offer reliable operation at a distance of one-

mile. If the area between you and another FRS operator

is free of obstructions, operation up to two miles can be

achieved. FRS radios broadcast on one of 14 channels,

each with a speciﬁc frequency within the FRS band.
The use of FRS radios does not require a license. FRS

was intended for use by families and small groups as an

inexpensive means of two-way communication. FRS

is intended for use throughout the United States, its

territories and possessions. It may also be used in Canada.

FRS is not approved outside of these areas and

may interfere with local government communication

frequencies (ﬁre, police, etc.).

FRS Features

FRS radios also include call functions, squelch codes,

channel scan features, and voice scramble capabilities.

Call functions allow you to push a Call button on the

radio to alert other radios set on the same channel. This

feature generates a call tone and is handy in a noisy

environment where the tone is easier to initially identify

than plain speech.
Squelch codes allow you to selectively block out other

FRS users that are not part of your group. They will still

be talking with others in their own group, but you will not

hear them on your radio. They may or may not hear you

and members of your group on their own radios. Squelch

codes act as a ﬁlter, blocking your FRS radio from

hearing other unwanted FRS users. Remember though,

these are public-use frequencies and everyone has a right

to talk or listen in.

Rino

520/530 Owner’s Manual

Rino

520/530 Owner’s Manual

Rino

520/530 Owner’s Manual

Rino

520/530 Owner’s Manual

Rino

520/530 Owner’s Manual

Rino

520/530 Owner’s Manual

Summary of Contents for GPSMAP 520 - Marine GPS Receiver





































































































































Search results

Summary of Contents for GPSMAP 520 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 520 - Marine GPS Receiver

Brands by name

Popular brands

Garmin GPSMAP 520 - Marine GPS Receiver, Owner'S Manual

Search results

Summary of Contents for GPSMAP 520 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 520 - Marine GPS Receiver

Brands by name

Popular brands