Garmin GPSMAP 2106 - Marine GPS Receiver Owner'S Manual Download Page 78

Page: 78 / 106

GPSMAP 2106/2110 Owner’s Manual

AIN

ENU

EMP

EMPERATURE

) T

3. Press the

Off

soft key to select or hide the map family, or press the

soft key to show the map family. The map appears on the Map Page when

a check mark appears in the box adjacent to the map.

Press the

Show All

soft key to show all map families. Press the

Show

None

soft key to clear all check boxes.

4 To view the notes or chart information for that map area, highlight the map

name, and press

ENTER

5. Press the

Chart Info

soft key to view chart information. Press the

Notes

soft key to view chart notes.

6. To scroll through the notes, highlight the

Notes

ﬁelds, press

ENTER

, and

use the

ROCKER

to scroll up, down, left, and right.

7. Press

QUIT

to exit.

Temp (Temperature) Tab

The Temp tab displays the water temperature log (if equipped with a temperature

sensing transducer or receiving NMEA Sonar temperature data). The chart reads

from right to left, so that the most recent temperature measured appears on the far

right side of the chart. The dotted grid lines within the chart indicate intervals in

the temperature scale and the duration of time.

•

Log and Graph Scale

—sets the temperature range (in degrees) for the

log. Select

Auto

to have the unit automatically determine the best range,

or select a span of 2, 4, 6, 8, or 10 degrees. Use the

Reset

button in Auto

mode to reset the automatic range.

•

Log Duration

—sets how fast or slow the temperature log scrolls (the

shorter the time duration, the faster the temperature log scrolls). Select a

duration from 1 minute to 2.5 hours.

Summary of Contents for GPSMAP 2106 - Marine GPS Receiver











































































































Search results

Summary of Contents for GPSMAP 2106 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 2106 - Marine GPS Receiver

Brands by name

Popular brands

Garmin GPSMAP 2106 - Marine GPS Receiver, Owner'S Manual

Search results

Summary of Contents for GPSMAP 2106 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 2106 - Marine GPS Receiver

Brands by name

Popular brands