Garmin GPSMAP 2106 - Marine GPS Receiver Owner'S Manual Download Page 101

Page: 101 / 106

GPSMAP 2106/2110 Owner’s Manual

PPENDIX

IMITED

ARRANTY

Limited Warranty

This Garmin product is warranted to be free from defects in materials or workmanship for

one year from the date of purchase. Within this period, Garmin will at its sole option repair or

replace any components that fail in normal use. Such repairs or replacement will be made at

no charge to the customer for parts or labor, provided that the customer shall be responsible for

any transportation cost. This warranty does not cover failures due to abuse, misuse, accident or

unauthorized alteration or repairs.
THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE

AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR

STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR

OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY

VARY FROM STATE TO STATE.
IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL,

INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE

USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE

PRODUCT. Some states do not allow the exclusion of incidental or consequential damages, so

the above limitations may not apply to you.
Garmin retains the exclusive right to repair or replace the unit or software or offer a full refund

of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND

EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.
To obtain warranty service, contact your local Garmin authorized dealer or call Garmin

Product Support for shipping instructions and an RMA tracking number. The unit should be

securely packed with the tracking number clearly written on the outside of the package. The

unit should then be sent, freight charges prepaid, to any Garmin warranty service station. A

copy of the original sales receipt is required as the proof of purchase for warranty repairs.

Garmin International, Inc.

1200 E 151st Street, Olathe, Kansas 66062 U.S.A.

Tel. 913/397.8200

Fax. 913/397.8282
Garmin (Europe) Ltd.

Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey,

SO51 9DL U.K.

Tel. 44/0870.8501241

Fax 44/0870.8501251

Online Auction Purchases:

Products sold through online auctions are not eligible for rebates

or other special offers from Garmin. Online auction conﬁrmations are not accepted for

warranty veriﬁcation. To obtain warranty service, an original or copy of the sales receipt from

the original retailer is required. Garmin will not replace missing components from any package

purchased through an online auction.

International Purchases:

A separate warranty is provided by international distributors for

units purchased outside the United States. This warranty is provided by the local in-country

distributor and this distributor provides local service for your unit. Distributor warranties are

only valid in the area of intended distribution. Units purchased in the United States or Canada

must be returned to the Garmin service center in the United Kingdom, the United States,

Canada, or Taiwan for service.
The Garmin GPSMAP 2106/2110 has no user-serviceable parts. Should you ever encounter a

problem with your unit, please take it to an authorized Garmin dealer for repairs.
The GPSMAP 2106/2110 is fastened shut with screws. Any attempt to open the case to change

or modify the unit in any way will void your warranty and may result in permanent damage to

the equipment.

Summary of Contents for GPSMAP 2106 - Marine GPS Receiver











































































































Search results

Summary of Contents for GPSMAP 2106 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 2106 - Marine GPS Receiver

Brands by name

Popular brands

Garmin GPSMAP 2106 - Marine GPS Receiver, Owner'S Manual

Search results

Summary of Contents for GPSMAP 2106 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 2106 - Marine GPS Receiver

Brands by name

Popular brands