Garmin GPSMAP 2106 - Marine GPS Receiver Owner'S Manual Download Page 69

Page: 69 / 106

GPSMAP 2106/2110 Owner’s Manual

AIN

ENU

YSTEM

your present location and provides magnetic north heading references

based on the variation you enter.

WARNING:

If you select

User Mag Var

, you must periodically update the

magnetic variation as your location changes. When using this setting, the

GPSMAP 2106/2110 unit does not automatically calculate and update the

magnetic variation at your present location. Failure to update this setting can

result in substantial differences between the information displayed on your unit

and external references, such as a magnetic compass.

To enter a user-deﬁned magnetic variation:

1. With the

Heading

ﬁeld set to

User Mag Var

, highlight the heading

reference ﬁeld (immediately to the right), and press

ENTER

2. Enter the magnetic variation at your current location, and press

ENTER

Time Sub Tab

Use the Time sub tab to adjust the time format, enter a time zone, and adjust for

daylight saving time to show the correct local time.

The following options are available:

•

Time Format

—select 12 Hour, 24 Hour (military), or UTC (also called

Greenwich Time) time format.

•

Time Zone

—select your time zone to show correct local time or enter a

UTC Offset (how many hours you are ahead or behind the time line).

•

Daylight Saving Time

—select

Auto

, or

Off

to adjust for daylight

saving time.

Comm (Communications) Sub Tab

The Comm sub tab controls the input/output format used when connecting your

GPSMAP 2106/2110 to external NMEA devices or a personal computer. The unit

supports two input/output ports.

NOTE:

See the

GPSMAP 2106/2110 & GPS17 Installation Instructions

for

more information on wiring and NMEA information.

Summary of Contents for GPSMAP 2106 - Marine GPS Receiver











































































































Search results

Summary of Contents for GPSMAP 2106 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 2106 - Marine GPS Receiver

Brands by name

Popular brands

Garmin GPSMAP 2106 - Marine GPS Receiver, Owner'S Manual

Search results

Summary of Contents for GPSMAP 2106 - Marine GPS Receiver

Reviews:

Related manuals for GPSMAP 2106 - Marine GPS Receiver

Brands by name

Popular brands