background image

2

Left-hand Keys and Knobs

The

COM power/volume knob

 controls

unit power and communications radio
volume. Press momentarily to disable
automatic squelch control.

The

VLOC volume knob

 controls audio

volume for the selected VOR/ Localizer
frequency. Press momentarily to enable/disable
the ident tone.

The

large left knob

 (COM/VLOC) is used

to tune the megahertz (MHz) value of the
standby frequency for the communications
transceiver (COM) or the VOR/Localizer
receiver, whichever is currently selected by the tuning cursor.

The

small left knob

 (PUSH C/V) is used to tune the kilohertz (kHz) value

of the standby frequency for the communications transceiver (COM) or the
VLOC receiver, whichever is currently selected by the tuning cursor. Press this
knob momentarily to toggle the tuning cursor between the COM and VLOC
frequency fields.

The

COM flip-flop key

 is used to swap the active and standby COM

frequencies. Press and hold to select emergency channel (121.500 MHz).

The

VLOC flip-flop key

 is used to swap the active and standby VLOC

frequencies (i.e., make the selected standby frequency active).

j

k

v

y

V

W

Right-hand Keys and Knobs

The

range key

 allows you to select the

desired map scale. Use the up arrow to zoom
out to a larger area, or the down arrow to
zoom in to a smaller area.

The

direct-to key

 provides access to the

direct-to function, which allows you to enter
a destination waypoint and establishes a direct
course to the selected destination.

The

menu key 

displays a context-sensitive

list of options. This options list allows you to
access additional features or make settings

changes which relate to the currently displayed page.

The

clear key

 is used to erase information or cancel an entry. Press and hold

this key to immediately display the Default Navigation Page, regardless of
which page is currently displayed.

The

enter key

 is used to approve an operation or complete data entry. It is

also used to confirm information, such as the Database Page during power on.

The

large right knob 

(GPS) is used to select between the various page

groups: NAV, WPT, AUX or NRST. With the on-screen cursor enabled, the
large right knob allows you to move the cursor about the page.

The

small right knob

 (PUSH CRSR) is used to select between the various

pages within one of the groups listed above. Press this knob momentarily to
display the on-screen cursor. The cursor allows you to enter data and/or make
a selection from a list of options.

D

m

c

E

t

r

RNG

.H\6$1'.12%6

Summary of Contents for GNS 530

















Reviews: