Garmin GNS 530, Quick Reference

Page: 10 / 16

10
NAVCOM Page
The NAVCOM Page provides a list of the airport communication and navigation
frequencies at your departure, enroute and arrival airports.
To Select a Frequency List for a Departure, Enroute or
Arrival Airport
1. Press the small right knob to activate the cursor.
2. Rotate the large right knob to place the cursor on the airport identifier
field (top line on the NAVCOM Page).
3. Rotate the small right knob to select the desired airport and press ENT .
To Scroll Through the List of Frequencies
1. Activate the cursor, if not already active, by pressing the small right
knob .
2. Rotate the large right knob to move the cursor through the list of
frequencies. If there are more frequencies in the list than can be displayed
on the screen, a scroll bar along the right-hand side of the screen will
indicate which part of the list is currently being displayed.
Frequency
Category
Usage Restriction
Information
Assigned
Frequency
Scroll Bar
Auto-Tuning a Frequency from the NAVCOM Page
1. Highlight the desired frequency by scrolling through the list of frequencies,
as described in the previous procedure.
2. To place a frequency in the standby field of the COM or VLOC window,
highlight the desired frequency and press ENT .
Bottom Row Annunciators and Messages
Departure, Enroute
or Arrival Airport
Message Annunciator:
Flashing (new message),
On, or blank (no message)
Integrity Failure (INTEG) or Position
Warning (WARN) Annunciator
(RAIM protection limit failure)
Navigation Source:
GPS or VLOC
CDI/RAIM Mode: Approach (APR), Terminal (TERM),
Enroute (ENR) or “0.30” (for VOR or localizer-based approaches)
OBS Mode: Suspend
(SUSP), OBS or blank (for
auto-sequencing)
Page Annunciator (NAV/WPT/AUX/
NRST/FPL/VNAV/PROC), Waypoint
Alert (“NEXT DTK”), Turn Advisory
(“TURN TO”), etc.
1DY&RP3DJH$QQXQFLDWRUV 0HVVDJHV