Garmin G500 Page 413 Pilot'S Manual Download

Page: 413 / 440

190-01717-10 Rev. H

Pilot’s Guide

9-11

Abnormal Operations

9.2.1

Battery Status Indications

Status indications include a battery icon and timers.

BATTERY ICON

•

Displays when the GBB 54 is powering the GDU, battery charge state is
insufficient, or a battery fault exists

•

Displays in the annunciator bar and on External LRUs page

•

Removed when the battery is at full charge

[1]

A green check on the External LRUs page denotes LRU availability.

[1]

Aircraft power is required.

[1]

The warm up process can take up to 30 minutes.

[1]

A total power loss occurs when aircraft power fails and the backup battery is unavailable or
depleted.

ICON

STATE

CONDITION

Absent

[1]

Charged

•

Backup battery at full charge
(>30 minutes) and available for use.

Charging/Warming Up

•

Battery has less than 30 minutes
remaining charge. [2]

•

Battery temperature is below -20ºC.
[2] [3]

Discharging

•

GDU on backup battery power.
15 to 30 minutes remaining.

Discharging/Caution

•

GDU on backup battery power.
0 to 15 minutes remaining.

Discharging/Warning

•

GDU on backup battery power for
longer than 30 minutes. Loss of
power may be imminent. [4]

•

Charge state uncertain (i.e., GDU
switches to backup battery power
before battery reaches full charge).

Unavailable/Error

•

Battery error. Backup battery power
is unavailable.

•

Capacity test is overdue.

Summary of Contents for G500

























































































































































































































































































































































































































































Search results

Summary of Contents for G500

Reviews:

Related manuals for G500

Brands by name

Popular brands

Garmin G500, Pilot'S Manual

Search results

Summary of Contents for G500

Reviews:

Related manuals for G500

Brands by name

Popular brands