Garmin G500, Pilot'S Manual

Page: 226 / 440

4-30 Pilot’s Guide 190-01717-10 Rev. H
Multi-Function Display
4.8 Chart Selection
AUTOMATIC CHART SELECTION
Automatic chart selection occurs every time the Charts page is opened. The type of
chart selected is determined by aircraft status and content from the active flight plan.
This function does not override manual chart selections unless a change occurs
during one of the following conditions.
CHART TYPES
Information
Airport surface charts, alternate minimums, rate of climb and
descent tables, inoperative components or visual aids tables,
hot spots, land and hold-short operations, and other
destination specific flight data.
Departure
Departure route descriptions, including takeoff minimums and
obstacle notes.
Arrival
Arrival procedure instructions.
Arrival charts are listed in alphabetical order.
Approach
All approach charts associated with the selected airport.
Charts are listed according to level of precision and approach
type. Runways are listed in numerical order.
CONDITION CHART DISPLAY DEFAULT
No flight plan or destination airport is
present.
Nearest airport diagram.
Aircraft is on the ground.
Nearest airport diagram (regardless of
flight plan).
Flight plan is present, but approach is
not loaded.
Airport surface chart for previous airport
in flight plan.
Approach is loaded in the selected
GPS navigator.
Applicable approach chart.
No charts are available for a selected
airport.
“Chart not available for [airport ID].”
To open a menu, tap Select . Enter an
airport identifier and choose from the
available chart types.