Garmin G500 Pilot'S Manual Download Page 77

Page: 77 / 440

190-01717-10 Rev. H

Pilot’s Guide

1-49

System Description

1.27.6

Terrain Advisories

ADVISORY

CONDITION

CORRECTIVE ACTION

Service TAWS.

Invalid config.

Terrain/TAWS alerting

configuration is invalid.

Contact a Garmin dealer for

support.

Fixed-Wing/Rotorcraft

mismatch. The GDU’s
aircraft setting conflicts
with the current external
TAWS configuration.

SVT could not be

enabled.

The SVT feature cannot

be unlocked with the
current SD card.

Verify that the SVT feature

unlock card is inserted in the
GDU. If necessary, contact a
Garmin dealer for support.

SVT has been

successfully
enabled. Restart all
GDUs to complete
enablement.

The SVT feature is

enabled during the
current power cycle.

To complete feature

enablement, restart all
configured GDUs.

<GDU> terrain

database resolution
insufficient.

Terrain database

resolution does not
support the current
terrain alerting
configuration
(rotorcraft only).

Download and install the

2.9 arc-second Terrain
database.

SVT Disabled

Outside terrain database

coverage area.

Contact a Garmin dealer for

database options.

Terrain/SVT Free

Trial Flight time
remaining: XX HRS

Terrain Settings Menu

displays the flight hours
remaining in the

SVT free trial period.

If SVT is desired, do one of

the following:

•

Contact a Garmin dealer
to complete feature
enablement within the
11 hour free trial period

•

Visit

flyGarmin.com

and

purchase the feature
enablement

Summary of Contents for G500

























































































































































































































































































































































































































































Search results

Summary of Contents for G500

Reviews:

Garmin G500, Pilot'S Manual, Page: 77 / 440

Search results

Summary of Contents for G500

Reviews: