Garmin G500, Pilot'S Manual, Page: 417 / 440

190-01717-10 Rev. H Pilot’s Guide 9-15
Abnormal Operations
9.3.1 AHRS and ADC Sensor Selection
The pilot is provided AHRS/ADC source selection controls when dual ADC or AHRS
sensors are configured.
SELECT SENSORS ON PILOT/CO-PILOT PFD
SELECT SENSORS ON A STANDBY TXI PFD
Alternate Selection
(Active)
Default Selection
(Active)
AHRS and ADC selection keys reside on
the Sensors page of the PFD menu.
Alternate attitude or air data sources
annunciate on the PFD. Default
selections do not annunciate.
Default Selections
(Active)
By default, the pilot side standby PFD
uses ADC 2 and AHRS 2 data when the
unit transitions to backup PFD mode.
This occurs during any one of the
following conditions.
•
Primary PFD failure
•
Miscompare state
•
No compare state
Pilot Selected
Sensors (Active)
Standby PFD allows you to specify
alternate data sources if the default
selections are not preferred.