Garmin FORERUNNER 745, Manual

Page: 36 / 47

34
Kalibrálás – a barométer érzékelőt automatikusan állíthatjuk be.
Rajz – a barométer widgetben megjelenő grafikon időskáláját állíthatjuk be.
Viharriasztás
– megadhatjuk azt a légnyomás esést, melynél a készülék vi -
har figyelmeztető jelzést küld.
Óra üzemmód – a karóra módban használatos érzékelőket állíthatjuk be. Az
Automatikus opcióval mozgásunknak megfelelően mind a magasság -
mérő, mind a barométer működhet, míg a Magasságmérő t olyan tevé -
kenység során érdemes választani, amely magasságváltozásokat ered -
ményez, illetve a Barométer t, amikor a tevékenység nem okoz magas -
ság változást.
Nyomás – beállíthatjuk, hogyan jelenítse meg a készülék a nyomás adato -
kat.
Barométer kalibrálása
A készülék gyárilag kalibrálva van, valamint automatikus kalibrációs funkció -
val is bír. A barométert manuálisan is kalibrálhatjuk, ha ismerjük a pontos ten -
gerszint feletti magasságot vagy tengerszinti nyomást.
1. Nyomjuk le hosszan a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
LIGHT
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
and settings.
Hold to manually change sports during an activity.
Ä
UP Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS GPS status
Battery status
Smartphone connection status
Wi ‑ Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe ™ sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity ( Charging the Device , page 26 ).
1
Select START , and select an activity.
2
Go outside, and wait while the device locates satellites.
3
Select START to start the timer.
4
Go for a run.
5
After you complete your run, select STOP to stop the timer.
6 Select an option:
• Select
Resume
to restart the timer.
• Select Save to save the run and reset the timer. You can
select the run to view a summary.
• Select Resume Later to suspend the run and continue
recording later.
• Select Lap to mark a lap.
• Select Discard > Yes to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ
™
activity apps to your device using
your Garmin Connect account ( Connect IQ Features ,
page 17 ).
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy .
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select START .
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
®
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select START to start the timer.
NOTE: The device does not record your activity data until
you start the timer.
Tips for Recording Activities
• Charge the device before starting an activity ( Charging the
Device , page 26 ).
• Select to record laps.
• Select UP or DOWN to view additional data pages.
Introduction 1
-t.
2. Válasszuk a Beállítások > Érzékelők és tartozékok > Barométer > Ka-
librálás
pontot.
3. Válasszunk az alábbi lehetőségek közül:
• A jelenlegi magasság vagy tengerszinti nyomás megadásához válasz -
szuk az
Igen
t.
• A GPS vétellel történő automatikus kalibráláshoz válasszuk a GPS hasz-
nálata pontot.
Rendszerbeállítások
Nyomjuk le hosszan a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
LIGHT
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
and settings.
Hold to manually change sports during an activity.
Ä
UP Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS GPS status
Battery status
Smartphone connection status
Wi ‑ Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe ™ sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity ( Charging the Device , page 26 ).
1
Select START , and select an activity.
2
Go outside, and wait while the device locates satellites.
3
Select START to start the timer.
4
Go for a run.
5
After you complete your run, select STOP to stop the timer.
6 Select an option:
• Select Resume to restart the timer.
• Select Save to save the run and reset the timer. You can
select the run to view a summary.
• Select Resume Later to suspend the run and continue
recording later.
• Select Lap to mark a lap.
• Select Discard > Yes to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ
™
activity apps to your device using
your Garmin Connect account ( Connect IQ Features ,
page 17 ).
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy .
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select START .
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
®
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select START to start the timer.
NOTE: The device does not record your activity data until
you start the timer.
Tips for Recording Activities
• Charge the device before starting an activity ( Charging the
Device , page 26 ).
• Select to record laps.
• Select UP or DOWN to view additional data pages.
Introduction 1
gombot, majd válasszuk a Beállítások > Rend-
szer pontot.
Nyelv
– menüfeliratok nyelvét adhatjuk meg.
Pontos idő – idő beállítások ( Idő beállítása, 34. oldal )
Háttérvilágítás – háttérvilágítás beállítása ( Háttérvilágítás beállítása, 34. ol -
dal ).
Hangok – hangjelzések, rezgés beállítása.
Ne zavarj – a ne zavarj funkció be- és kikapcsolása. Az alvásidő opcióval a
Garmin Connect fiókban megadott általános alvással töltött időszakra a
ne zavarj mód automatikusan bekapcsol.
Gomb funkciók – a készülék gombjaihoz direkt eléréseket, gyorsparancso -
kat rendelhetünk ( Gomb funkciók beállítása, 34. oldal ).
Automatikus lezárás – a gombok automatikus lezárása az akaratlan gomb -
nyomást megelőzendő. A Tevékenység alatt opcióval a számlálóval kí -
sért tevékenység indításakor a gombok automatikusan lezárásra kerül -
nek, míg a Karóra mód opcióval tevékenysége végzése nélkül is lezá -
ródnak a gombok.
Mértékegységek – mértékegységek beállítása ( Mértékegység beállítása, 34.
oldal ).
Jelleg – választhatunk a tempó és a sebesség kijelzése között, illetve a hét
első napját adhatjuk meg, valamint a koordináták kijelzési formátumát és
a térképdátumot állíthatjuk be.
Adatrögzítés – a tevékenység adatok rögzítésének beállítása. Az alapbeál -
lítás szerinti Intelligens rögzítés hosszabb időn át képes rögzíteni a te -
vékenység adatokat, mint a Mp.-ként beállítás, amely bár rendkívül pon -
tosan (másodperces gyakorisággal) követi nyomon a változásokat, azon -
ban sok memóriát foglal el, ezáltal hosszabb tevékenységek tárolását
nem teszi lehetővé.
USB-mód – beállíthatjuk, hogy számítógépre történő csatlakoztatás háttértár
módban történjen, vagy Garmin módban.
Alapbeállítások visszaállítása – beállítások visszaállítása a gyári alapér -
tékekre, illetve a felhasználói adatok törlése ( Gyári beállítások visszaál -
lítása, 38. oldal ).
Szoftverfrissítés – a Garmin Express programon keresztül letöltött szoftver -
frissítéseket telepíthetjük.
Névjegy: Megjeleníti a készülék, a szoftver, a licenc és a jogi információkat.
Idő beállítása
Nyomjuk le hosszan a
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
LIGHT
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
and settings.
Hold to manually change sports during an activity.
Ä
UP Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS GPS status
Battery status
Smartphone connection status
Wi ‑ Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe
™
sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity ( Charging the Device , page 26 ).
1
Select START , and select an activity.
2
Go outside, and wait while the device locates satellites.
3
Select START to start the timer.
4
Go for a run.
5
After you complete your run, select STOP to stop the timer.
6
Select an option:
• Select Resume to restart the timer.
• Select Save to save the run and reset the timer. You can
select the run to view a summary.
• Select
Resume Later
to suspend the run and continue
recording later.
• Select Lap to mark a lap.
• Select Discard > Yes to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ
™
activity apps to your device using
your Garmin Connect account ( Connect IQ Features ,
page 17 ).
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy .
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select
START
.
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
®
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select
START
to start the timer.
NOTE: The device does not record your activity data until
you start the timer.
Tips for Recording Activities
• Charge the device before starting an activity ( Charging the
Device , page 26 ).
• Select to record laps.
• Select UP or DOWN to view additional data pages.
Introduction 1
gombot, majd válasszuk a
Beállítások
>
Rend-
szer > Pontos idő pontot.
Időformátum – 12 vagy 24 órás formátumban tekinthetjük meg az időt.
Idő beállítása
– a GPS-pozíció alapján automatikusan is történhet az időzó -
na meghatározása, vagy magunk is megadhatjuk az időzónát.
Pontos idő – az idő manuális megadását kiválasztva adjuk meg a pontos
időt.
Riasztások – egy riasztást élesíthetünk, amely napkelte vagy naplemente
bekövetkezte előtt megadott idővel jelez.
Szinkronizálás a GPS-vétellel – másik időzónába való átlépés vagy a nyári
időszámítás aktiválása során lehetőség van a GPS-vétel alapján megha -
tározott idővel történő szinkronizálásra.
Háttérvilágítás beállítása
1. Az óra számlapon nyomjuk le hosszan a
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
LIGHT
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
and settings.
Hold to manually change sports during an activity.
Ä
UP Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS GPS status
Battery status
Smartphone connection status
Wi
‑
Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe
™
sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity ( Charging the Device , page 26 ).
1
Select START , and select an activity.
2
Go outside, and wait while the device locates satellites.
3
Select START to start the timer.
4
Go for a run.
5
After you complete your run, select
STOP
to stop the timer.
6
Select an option:
• Select Resume to restart the timer.
• Select Save to save the run and reset the timer. You can
select the run to view a summary.
• Select Resume Later to suspend the run and continue
recording later.
• Select Lap to mark a lap.
• Select Discard > Yes to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ ™ activity apps to your device using
your Garmin Connect account ( Connect IQ Features ,
page 17 ).
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy .
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select START .
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
®
sensors.
5 If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select START to start the timer.
NOTE: The device does not record your activity data until
you start the timer.
Tips for Recording Activities
• Charge the device before starting an activity ( Charging the
Device , page 26 ).
• Select to record laps.
• Select UP or DOWN to view additional data pages.
Introduction 1
gombot.
2.
Válasszuk a
Beállítások
>
Rendszer
>
Háttérvilágítás
t.
3. Válasszuk a Tevékenység közben és az Óra üzemmód opciók között.
4. Válasszunk az alábbiak között:
• A Gombok és Riasztások opcióval a háttérvilágítás valamely gomb
megnyomására, valamint riasztás megjelenésekor kapcsol fel.
• A Kézmozdulat opcióval akkor kapcsol fel, amikor kezünket felemeljük
és csuklónkat arcunk felé fordítjuk (ránézünk az órára).
• Az Időkorlát pontban azt az időtartamot állíthatjuk be, amelynek letelté -
vel a világítás kikapcsol.
•
A
Fényerő
opcióval a fényérőt állíthatjuk.
Gomb funkciók beállítása
A gombok hosszan történő nyomva tartásával aktiválódó funkciókat, illetve
a gombok együttes lenyomásával (gomb kombinációra) aktiválódó funkció -
kat állíthatjuk be.
1. Az óra számlapon nyomjuk le hosszan a
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
LIGHT
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
and settings.
Hold to manually change sports during an activity.
Ä
UP Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS GPS status
Battery status
Smartphone connection status
Wi
‑
Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe
™
sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity ( Charging the Device , page 26 ).
1
Select START , and select an activity.
2 Go outside, and wait while the device locates satellites.
3
Select START to start the timer.
4
Go for a run.
5
After you complete your run, select
STOP
to stop the timer.
6
Select an option:
• Select Resume to restart the timer.
• Select Save to save the run and reset the timer. You can
select the run to view a summary.
• Select Resume Later to suspend the run and continue
recording later.
• Select Lap to mark a lap.
• Select Discard > Yes to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ ™ activity apps to your device using
your Garmin Connect account ( Connect IQ Features ,
page 17 ).
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy .
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select START .
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
®
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select START to start the timer.
NOTE: The device does not record your activity data until
you start the timer.
Tips for Recording Activities
• Charge the device before starting an activity ( Charging the
Device , page 26 ).
• Select to record laps.
• Select UP or DOWN to view additional data pages.
Introduction 1
gombot.
2.
Válasszuk a
Beállítások
>
Rendszer
>
Parancsgombok
pontot.
3. Válasszuk ki a beállítani kívánt gombot, gomb kombinációt.
4. Adjuk meg az aktiválni kívánt funkciót.
Mértékegység beállítása
A távolság, a tempó, a sebesség, a súly, az emelkedés, a súly és a magas -
ság mértékegységeit adhatjuk meg.
1. Az óra számlapon nyomjuk le hosszan a
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
LIGHT
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
and settings.
Hold to manually change sports during an activity.
Ä
UP Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS GPS status
Battery status
Smartphone connection status
Wi
‑
Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe
™
sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity ( Charging the Device , page 26 ).
1
Select START , and select an activity.
2 Go outside, and wait while the device locates satellites.
3
Select START to start the timer.
4
Go for a run.
5
After you complete your run, select
STOP
to stop the timer.
6
Select an option:
• Select Resume to restart the timer.
• Select Save to save the run and reset the timer. You can
select the run to view a summary.
• Select Resume Later to suspend the run and continue
recording later.
• Select Lap to mark a lap.
• Select Discard > Yes to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ ™ activity apps to your device using
your Garmin Connect account ( Connect IQ Features ,
page 17 ).
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy .
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select START .
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
®
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select START to start the timer.
NOTE: The device does not record your activity data until
you start the timer.
Tips for Recording Activities
• Charge the device before starting an activity ( Charging the
Device , page 26 ).
• Select to record laps.
• Select UP or DOWN to view additional data pages.
Introduction 1
gombot.
2.
Válasszuk a
Beállítások
>
Rendszer
>
Mértékegységek
pontot.
3. Válasszunk egy adattípust.
4. Válasszunk egy mértékegységet.
Óra
Ébresztő beállítása
Számos egymástól független ébresztést állíthatunk be. Minden egyes éb -
resztésnél külön választhatunk egyszeri csörgést vagy rendszeres ismétlést.
1. Az óra számlapon nyomjuk le hosszan a
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
LIGHT
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
and settings.
Hold to manually change sports during an activity.
Ä
UP Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS GPS status
Battery status
Smartphone connection status
Wi ‑ Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe
™
sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity ( Charging the Device , page 26 ).
1
Select START , and select an activity.
2
Go outside, and wait while the device locates satellites.
3
Select START to start the timer.
4
Go for a run.
5
After you complete your run, select STOP to stop the timer.
6
Select an option:
• Select Resume to restart the timer.
• Select Save to save the run and reset the timer. You can
select the run to view a summary.
• Select Resume Later to suspend the run and continue
recording later.
• Select Lap to mark a lap.
• Select Discard > Yes to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ
™
activity apps to your device using
your Garmin Connect account ( Connect IQ Features ,
page 17 ).
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy .
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select
START
.
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
®
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select START to start the timer.
NOTE: The device does not record your activity data until
you start the timer.
Tips for Recording Activities
• Charge the device before starting an activity ( Charging the
Device , page 26 ).
• Select to record laps.
• Select
UP
or
DOWN
to view additional data pages.
Introduction 1
gombot.
2. Válasszuk az Ébresztőóra > Riasztás hozzáadása t.
3. Válasszunk az Idő pontot, majd adjuk meg az ébresztés időpontját.
4. Válasszuk az Ismétlés pontot, ahol beállíthatjuk, hogy az ébresztés meg -
ismétlődjön (nem kötelező).
5. Válasszuk a Hangok pontot, ahol kiválaszthatjuk a jelzés típusát (nem kö -
telező).
6. A Háttérvilágítás > Be pontot kiválasztva csörgés során a háttérvilágítás
is bekapcsol.
7. Az Üzenet opcióval leírást adhatunk meg az ébreszőthöz (nem kötelező)
Ébresztés törlése
1. Az óra számlapon nyomjuk le hosszan a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
LIGHT
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
and settings.
Hold to manually change sports during an activity.
Ä
UP Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS GPS status
Battery status
Smartphone connection status
Wi ‑ Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe ™ sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity ( Charging the Device , page 26 ).
1
Select START , and select an activity.
2
Go outside, and wait while the device locates satellites.
3
Select START to start the timer.
4
Go for a run.
5
After you complete your run, select STOP to stop the timer.
6
Select an option:
• Select
Resume
to restart the timer.
• Select Save to save the run and reset the timer. You can
select the run to view a summary.
• Select Resume Later to suspend the run and continue
recording later.
• Select
Lap
to mark a lap.
• Select Discard > Yes to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ
™
activity apps to your device using
your Garmin Connect account ( Connect IQ Features ,
page 17 ).
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy .
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select START .
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4 If necessary, wait while the device connects to your ANT+
®
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select START to start the timer.
NOTE: The device does not record your activity data until
you start the timer.
Tips for Recording Activities
• Charge the device before starting an activity ( Charging the
Device , page 26 ).
• Select to record laps.
• Select UP or DOWN to view additional data pages.
Introduction 1
gombot.
2. Válasszuk az Ébresztőóra- t.
3. Válasszunk ki egy ébresztést.
4.
Válasszuk a
Törlés
pontot.