2
Installation
FLUSH MOUNTING
The Fishfinder 240 can be mounted flush with the dash or
electronics rack. If you choose to flush mount the unit, the
Mounting Bracket will have to be removed from the Display
Head.
1. Using the mounting bracket as a template, mark the location of
the four mounting holes and the center relief hole.
2. After carefully marking these locations drill the mounting holes
using either a 6mm or 15/64 drill.
3. Using a 1-
7
/
8
hole saw, cut the center relief.
4. Using M5 screws, secure the unit to the mounting surface.
If you are flush mounting the unit on a sheet metal surface,
use the mounting bracket on the back to help reinforce the
metal.
Be careful not to install screws that are too long!
The mounting holes in the unit are approximately
1/4 deep, installing too long of screw will damage
the unit and void the warranty.
10
