2
Installation
INSTALLING THE WIRING ADAPTER
8
If your boat has an electrical system, it may be possible to
wire the unit directly to an unused holder on your current fuse
block. If you are using the boats fuse block, remove the inline
fuse holder supplied
with the unit. Make
sure you install a 2-
Amp fuse in the fuse
block to protect the
unit.
If your boat does
not have a fuse block,
the unit can be wired
directly to the battery.
Make sure the 2-Amp
in-line fuse supplied
with the unit is
installed.
The fishfinder can
be connected to another piece of NMEA compatible electronic
equipment. If equipped with a capable transducer, the fishfind-
er sends depth, temperature and velocity information that could
be displayed on another device.
During a typical installation, only the
Red
and
Black
wires are used. The
Blue
wire supplies
NMEA data, and doesnt have to be connected
for normal operation of the unit.
Red Wire
Blac
k Wire
2
