View Green: Allows you to move the pin location to get a
more precise distance measurement (
).
Measure Shot: Shows the distance of your previous shot
recorded with the Garmin AutoShot
™
feature (
). You can also manually
record a shot (
Manually Measuring a Shot, page 13
).
Scorecard: Opens the scorecard for the round (
).
Odometer: Shows the recorded time, distance, and steps
traveled. The odometer automatically starts and stops
when you start or end a round. You can reset the
odometer during a round.
PinPointer: The PinPointer feature is a compass that
points to the pin location when you are unable to see
the green. This feature can help you line up a shot even
if you are in the woods or in a deep sand trap.
NOTE: Do not use the PinPointer feature while in a
golf cart. Interference from the golf cart can affect the
accuracy of the compass.
Custom Targets: Allows you to save a location, such as an
object or obstacle, for the current hole (
).
Club Stats: Shows your statistics with each golf club, such
as distance and accuracy information. Appears when
you pair Approach
®
CT10 sensors or enable the Club
Prompt setting.
Settings: Allows you to customize the golf activity
settings (
Activities and App Settings, page 16
).
Moving the Flag
You can take a closer look at the green and move the pin
location.
1 From the hole information screen, press START.
2 Select View Green.
3 Tap or drag to move the pin location.
4 Press START.
The distances on the hole information screen are
updated to show the new pin location. The pin location
is saved for only the current round.
Measuring Distance with Touch Targeting
While playing a game, you can use touch targeting to
measure the distance to any point on the map.
1 While playing golf, tap the map.
2 Tap or drag your finger to position the target circle .
You can view the distance from your current position
to the target circle, and from the target circle to the pin
location.
3 If necessary, select
or
to zoom in or out.
Viewing Measured Shots
Before the device can automatically detect and measure
shots, you must enable scoring.
Your device features automatic shot detection and
recording. Each time you take a shot along the fairway,
the device records your shot distance so you can view it
later.
TIP: Automatic shot detection works best when you wear
the device on your leading wrist and make good contact
with the ball. Putts are not detected.
1 While playing golf, press START.
2 Select Measure Shot.
Your last shot distance appears.
NOTE: The distance automatically resets when you hit
the ball again, putt on the green, or move to the next
hole.
3 Press DOWN.
4 Select Previous Shots to view all recorded shot
distances.
Manually Measuring a Shot
You can manually add a shot if the watch doesn't detect
it. You must add the shot from the location of the missed
shot.
1 Take a shot and watch where your ball lands.
2 From the hole information screen, press START.
3 Select Measure Shot.
4 Press DOWN.
5 Select Add Shot >
.
6 If necessary, enter the club you used for the shot.
7 Walk or drive to your ball.
The next time you take a shot, the watch automatically
records your last shot distance. If necessary, you can
manually add another shot.
Keeping Score
1 From the hole information screen, press START.
2 Select Scorecard.
The scorecard appears when you are on the green.
3 Press UP or DOWN to scroll through the holes.
4 Press START to select a hole.
5 Press UP or DOWN to set the score.
Your total score is updated.
Recording Statistics
Before you can record statistics, you must enable
statistics tracking (
Activities and App Settings, page 16
).
1 From the scorecard, select a hole.
2 Enter the total number of strokes taken, including
putts, and press START.
3 Set the number of putts taken, and press START.
NOTE: The number of putts taken is used for statistics
tracking only and does not increase your score.
Activities and Apps
13
Summary of Contents for D2 MACH1
Page 1: ...D2 MACH1 Owner sManual ...
Page 8: ......
Page 85: ......
Page 86: ...support garmin com June 2022 190 02855 00_0B ...
