Garmin D2 MACH1, Owner'S Manual

Page: 10 / 86

Clocks
Setting an Alarm
You can set multiple alarms.
1 From the watch face, hold MENU.
2 Select Clocks > ALARMS > Add Alarm.
3 Enter the alarm time.
Editing an Alarm
1 From the watch face, hold MENU.
2 Select Clocks > ALARMS > Edit.
3 Select an alarm.
4 Select an option:
• To turn the alarm on or off, select Status.
• To change the alarm time, select Time.
• To set the alarm to repeat regularly, select Repeat,
and select when the alarm should repeat.
• To select the type of alarm notification, select
Sound and Vibe.
• To select a description for the alarm, select Label.
• To delete the alarm, select Delete.
Starting the Countdown Timer
1 From the watch face, hold MENU.
2 Select Clocks > TIMERS.
3 Select an option:
• To set and save a countdown timer for the first time,
enter the time, press MENU, and select Save Timer.
• To set and save additional countdown timers, select
Add Timer, and enter the time.
• To set a countdown timer without saving it, select
Quick Timer, and enter the time.
4 If necessary, press MENU, and select an option:
• Select Time to change the time.
• Select Restart > On to automatically restart the
timer after it expires.
• Select Sound and Vibe, and select a type of
notification.
5 Press START to start the timer.
Deleting a Timer
1 From the watch face, hold MENU.
2 Select Clocks > TIMERS > Edit.
3 Select a timer.
4 Select Delete.
Using the Stopwatch
1 From the watch face, hold MENU.
2 Select Clocks > STOPWATCH.
3 Press START to start the timer.
4 Press LAP to restart the lap timer .
The total stopwatch time continues running.
5 Press STOP to stop both timers.
6 Select an option:
• To reset both timers, press DOWN.
• To save the stopwatch time as an activity, press
MENU, and select Save Activity.
• To reset the timers and exit the stopwatch, press
MENU, and select Done.
• To review the lap timers, press MENU, and select
Review.
NOTE: The Review option only appears if there have
been multiple laps.
• To return to the watch face without resetting the
timers, press MENU, and select Go to Watchface.
• To enable or disable lap recording, press MENU, and
select Lap Key.
Adding Alternate Time Zones
You can display the current time of day in additional time
zones on the alternate time zones glance. You can add up
to four alternate time zones.
NOTE: You may need to add the alternate time zones
glance to the glance loop (
Customizing the Glance Loop,
page 27 ).
1 From the watch face, hold MENU.
2 Select Clocks > ALT. TIME ZONES > Add Alt. Time
Zone.
3 Select an option:
• Select Use Airport Ident. to search for a time
zone by entering the alphanumeric identifier for an
aviation waypoint.
• Select Use Map to choose a time zone for a
geographic location.
4 Select a time zone.
5 If necessary, rename the zone.
Editing an Alternate Time Zone
1 From the watch face, hold MENU.
2 Select Clocks > ALT. TIME ZONES > Edit.
2 Clocks