manualshive.com logo in svg

Garmin CIRRUS PERSPECTIVE TOUCH+, Cockpit Reference Manual

Share
Download
Garmin CIRRUS PERSPECTIVE TOUCH+ Cockpit Reference Manual Download Page 269

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin

190-02954-01 Rev. A 

Appendix

243

Flight

Instruments

EIS

Nav/Com/

XPDR/Audio

Flight

 

Management

Hazar

d

Avoidance

AFCS

Additional

Featur

es

Annun/Alerts

Appendix

Index

Flight

Instruments

EAS

Audio and

CNS

Flight

 

Management

Hazar

d

Avoidance

AFCS

Additional

Featur

es

Abnormal

Oper

ation

Annun/Alerts

Appendix

Index

APPENDICES

DATABASE MANAGEMENT

Two options are available for updating databases:

•  Garmin Pilot™ in combination with a Portable Electronic Device (PED) which transfers 

databases to the system through the FS 510 Wireless Transceiver

•  A 32 GB Supplemental Data (SD) card (or FS 510 card as a storage device) and an SD Card 

reader to download databases from a personal computer
See descriptions and procedures in this Appendix for more information.
In some cases it may be necessary to obtain an unlock code from Garmin in order to make 

the database product functional.  It may also be necessary to have the system configured by a 
Garmin authorized service facility in order to use some database features.

Database information is obtained from third party sources. Inaccuracies in the data may be 

discovered from time to time. Garmin communicates this information by issuing a Database 
Alert. These notifications are available on flygarmin.com.

Garmin requests the flight crew report any observed discrepancies related to da-

tabase information. These discrepancies could come in the form of an incorrect pro-
cedure; incorrectly identified terrain, obstacles and fixes; or any other displayed 
item used for navigation or communication in the air or on the ground.  Go to 
flygarmin.com and select Aviation Data Error Report.

 

CAUTION: 

Never disconnect power to the system when loading a database.  Power 

interruption during the database loading process could result in maintenance being 
required to reboot the system.

 

NOTE:  

Loading a database in the system prior to its effective date will result in 

the expiration date on the Power-on Display and the effective date on the ‘Database 
Status’ Screen being displayed in amber.

Summary of Contents for CIRRUS PERSPECTIVE TOUCH+





































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands