![Garmin 400W Series Pilot'S Manual & Reference Download Page 42](http://html1.mh-extra.com/html/garmin/400w-series/400w-series_pilots-manual-and-reference_3740401042.webp)
2 - NAV PAGES
32
190-00356-00 Rev B
Restoring Factory Settings
You can also quickly return all data field settings to
their original factory settings.
To restore all six data fields to factory default
settings:
1. Startng wth the default NAV page, press the
MENU
key to dsplay an optons menu.
2. Turn the
large right
knob to hghlght the
“Restore Defaults?” opton and press
ENT
.
Dual Unit Considerations
A “Crossfill?” option is provided from the Default
NAV Page. This option allows you to transfer a direct-
to destination, the active flight plan, any stored flight
plan or user waypoints to a second 400W or 500W-
series Garmin unit.
Some crossfill operations can be done automati-
cally. If the crossfill method in both 400W (or 500W)-
series units is set to “auto”, a change in the direct-to
destination or active flight plan on one unit can also be
seen on the other. See Section 4 - Flight Plans - Flight
Plan Catalog Options for additional details on using
the “Crossfill?” option.
NOTE:
The databases of the 400/500 series and
the 400W/500W are incompatible so you may not
mix systems.
Map Page
The second NAV page is the map page, which dis-
plays your present position using an airplane symbol,
along with nearby airports, navaids, user-defined
waypoints, airspace boundaries, lakes, rivers, high-
ways and cities.
NOTE:
The electronic chart is an aid to navigation
and is designed to facilitate the use of authorized
government charts, not replace them. Land and
water data is provided only as a general reference
to your surroundings. The positional accuracy
of the land and water data is not of a precision
suitable for use in navigation and it should not
be used for navigation. Only official government
charts and notices contain all information needed
for safe navigation – and, as always, the user is
responsible for their prudent use.
Data
Fields
Present
Position
Map Display
Map Range
Page location
in NAV group
NOTE:
If the 400W-series unit is unable to
determine a GPS position, the present position
(airplane) symbol will appear on the Map Page in
yellow. No symbol will be present when there is
no active flight plan.
Map Page
190-00356-00_0B.indd 32
9/7/2007 2:49:07 PM