![background image](http://html1.mh-extra.com/html/garland/sioux-1455-zsl/sioux-1455-zsl_instruction-manual_3648281048.webp)
English
48/184
Do not use this machine on slopes greater than 15°.
Cutting on hilly areas can be dangerous.
Be alert when you walk on slopes or wet grass.
Slopes always cut horizontally, not cut bottom up
or top down. Be especially careful when changing
direction on a slope.
Never cut with the mower in reverse or by pulling
it. Be alert when you back up or pull the mower
towards you.
Do not tilt the machine with the engine running
except in the special case that you have to start
cutting an area with tall grass. This is the only case
in which you can raise the front wheels slightly
to facilitate entry of the mower to the work area.
Stop the lawnmower’s engine if you tilt it to cross
surfaces other than grass and when transporting the
lawnmower to and from the area to be cut.
Do not go near the machine’s cutting tool when it is
running. Danger! Risk of finger amputation.
Keep hands and feet away from the
blades. Do not solely rely on the
security features of this machine.
It is necessary to pay attention to the possible
loosening or overheating of the parts of the machine.
If you detect any anomaly immediately stop the
machine and check it carefully.
In case of mechanical failure take the machine to the
technical service for repair. You should not continue
working if you notice that the operation is not correct.
Remember to always use the machine with clean
hands and without any fuel or oil remains.
Clean the work area and remove all obstacles that
may cause accidents. Check the work area when
going to work and remove all items that could
become entangled in the cutting tool. Also remove
all the objects that the cutting tool can violently eject
while in operation.
Do not allow anyone to enter the work perimeter.
This work perimeter must be 15 meters and is a
danger zone.
You must turn off the engine when you are moving
between work areas.
Never leave this machine unattended.
Be careful not to touch the hot parts of the
machine while the engine is running or after
use, such as exhaust, spark plug or high voltage
cables.
Do not use other accessories this machine except
those recommended by our company since its use
could cause severe damage to the user, people close
to the machine and the machine itself.
Always follow the safety rules given in this manual.
7.1. HOLDING AND GUIDING THE MACHINE
While working, always hold the
lawnmower with both hands on the
handlebar.
Stand behind the mower and direct it while walking
behind it.
DANGER
DO NOT USE MOWER WITHOUT ENTIRE
GRASS CATCHER OR DEFLECTOR IN PLACE
KEEP HANDS and FEET AWAY
Summary of Contents for SIOUX 1455 ZSL
